Denon AVR-1610 manual 12

ENGLISH

Getting	Converting Input video signals for Output
Started
	(Video Conversion Function)
Connections
	The AVR-1610 is equipped with four types of video input connectors (HDMI, Component video, S-Video
	and video) and three types of video output connectors (HDMI, Component video and video).
	Use the connectors according to the devices to be connected.
	This function automatically converts various formats of video signals input to the AVR-1610 into the format
Settings	used to output the video signals from the AVR-1610 to a monitor.
			AVR-1610	Monitor (TV)
	Video devices
Playback		Input	Output
	Output			Input
Remote		(IN)	(MONITOR OUT)
Control	HDMI connector	HDMI connector	HDMI	HDMI connector
Information			connector
	Component video	Component video	Component video	Component video
	connectors	connectors	connectors	connectors
Troubleshooting	S-Video connector	S-Video
		connector
Specifications	Video connector	Video connector	Video connector	Video connector
	The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60
	formats.
	NOTE

•The S-Video input connector is exclusively for use with a Control Dock for iPod. It can be used when the Control Dock for iPod is connected to the connector assigned to the iPod input source.

•HDMI signals cannot be converted into analog signals.

•When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate.

Important Information

How the on-screen display is displayed depending on the video input signal

The way the on-screen display of the menus, status, etc., is displayed differs according to the type of video signal input to the AVR-1610.

When video signals are input from the HDMI or component video connectors

•Menu: Switches to a screen with a black background and the menu is superimposed. (b)

•Status display: Not displayed.

b: If you want to display the menus superimposed on the picture being played, input the same video signals to the S-Video or video connectors. When a menu is displayed, the picture switches to the one being input from the S-Video or video connectors and the menu is displayed superimposed over this picture.

NOTE

Menus and status display screens are not displayed for component video connector pictures. To display them, also connect the video connectors.

When video signals are being input from the S-Video or video connectors

•Menu: Menus are displayed superimposed over the picture being played.

•Status display: Displayed.

nExamples of on-screen display

• Menu screen	• Status display screen
	When the input source is	When the volume is adjusted
	switched
MENU
1.Parameter
2.Information
3.Auto Setup
4.Manual Setup
5.Input Setup
	[Auto]
	IN :DVD
[ENT]:Select	MODE:STEREO	Master Volume -80.0dB

Status display: The operating status is displayed temporarily on the screen when the input source is switched or the volume is adjusted.