Denon AVR-1610 manual 43

Setting items Setting contents

Center Image				0.0 ~ 1.0 (0.3)
Assign center channel signal
to front left and right channels
for wider sound.
Panorama				ON : Set.
Assign front L/R signal also				OFF : Do not set.
to surround	channels,		for
wider sound.
Dimension				0 ~ 6 (3)
Shift sound	image center
to front or rear, to adjust
playback balance.
Center Width				0 ~ 7 (3)
Assign center channel signal
to front left and right channels
for wider sound.
Delay Time				0ms ~ 300ms (30ms)
Adjust delay time to control
sound stage size.
Effect Level				1 ~ 15 (10)
Adjust the strength of			the	Set to a lower level if the positioning and sense of phase of the
surround effect.
				surround signals seems unnatural.
Room Size				Small : Simulate acoustics of a small room.
Determine size		of acoustic		Medium small : Simulate acoustics of a medium-small room.
environment.				Medium : Simulate acoustics of a medium room.
NOTE				Medium large : Simulate acoustics of a medium-large room.
				Large : Simulate acoustics of a large room.
“Room Size”		does	not
indicate the size of the room
in which sources are played.

			ENGLISH
	Adjusting the Sound Field Effect (Parameter)			Getting
Setting items	Setting contents
				Started
AFDM (Auto Flag Detect	ON : Set.
Mode)	OFF : Do not set.
Detectsthesource’ssurround	nFor 2-channel sources			Connections
Surround Back
back channel signal and sets
the optimum surround mode
automatically.
Sets the method of	ON : The surround back channel is used.			Settings
generating of the surround	OFF : No signal is played from the surround back channels.
back channel.	nFor multi channel sources
	Set this to set the method of generating of the surround back channel
	for sources that do not include surround back signals and when you			Playback
	Check the audio signals of the source being played before making this
	do not want to play the surround back signals included in the source.
	setting.
				Remote
	OFF : No signal is played from the surround back channels.
	MTRX ON : Generate and play the surround back signals from the
	surround channel signals.			Control
	decoding the signals in the “Dolby Pro Logic gx Cinema” mode.
	PLgx CINEMAz1 : Generate and play the surround back signals by
	PLgx MUSICz2 : Generate and play the surround back signals by			Information
	ES DSCRTz3 : Play the surround back signals included in the 6.1-
	decoding the signals in the “Dolby Pro Logic gx Music” mode.
	ES MTRX : Generate and play the surround back signals from the
	surround channel signals of the DTS source.
	channel DTS source.			Troubleshooting
	DSCRT ONz3 : Play the surround back signals included in the 7.1-
	channel source.
	z1 : This can be selected when “S.Back” in the “Speaker Config.”
	settings (vpage 25) is set to “2ch”.
	z2 : This can be selected when “S.Back” in the “Speaker Config.”
	settings (vpage 25) is set to “2ch” or “1ch”.			Specifications
	z3 : When “AFDM” is set to “ON”, the surround back channel is played
	with the AFDM function. When selected while “AFDM” is set to
	“OFF”, the source’s surround back signals are played.
	This can also be set by pressing	.
	NOTE

This is valid when the “Pre Assign” setting (vpage 24) is set to “7.1- channel surround back” or “6.1-channel surround back”, and when the “S.Back” setting (vpage 25) is set to “Large” or “Small”.

Remote control	:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu	40
operation buttons
		Cancel the menu