Antenna terminals
Direction of broadcasting station
FM antenna
75 Ω/ohms | AM loop | ||
Coaxial cable | |||
antenna | |||
|
| ||
FM indoor antenna | (supplied) | ||
(supplied) |
|
| |
Black | White |
| |
Connecting Devices not Equipped with HDMI connectors
nConnection of AM antennas
1Push the lever.
2Insert the conductor.
3Return the lever.
NOTE
• Do not connect two FM antennas simultaneously. |
• Even if an external AM antenna is used, do not disconnect the AM |
loop antenna. |
ENGLISH
| Once Connections are | Getting | |||
| Completed | ||||
Started | ||||
Turning the Power On | ||||
| ||||
1 | Press | . | Connections | |
The power indicator lights red and the | ||||
power is set to the standby mode. | ||||
| ||||
|
|
| ||
2 | Press . | Settings | ||
The power indicator flashes green and the | ||||
power turns on. | ||||
| ||||
|
| |||
bAlso press | when in | Playback | ||
standby mode, the power turns on. | ||||
|
|
| ||
When | has been pressed, the input |
| ||
Ground
AM outdoor antenna
• Make sure the AM loop antenna lead terminals do not touch metal |
parts of the panel. |
source set with the | is set. | Remote |
nAM loop antenna assembly
1Remove the vinyl tie and take out the 
connection line.
2Bend in the reverse direction.
Mount 
Installation hole Mount on wall, etc.
Connecting the Power Cord
Wait until all connections have been completed before connecting the power cord.
To household power outlet (AC 120 V, 60 Hz)
Power cord
If a | has been pressed, the input source stored | Control | ||
in the memory for the quick select function is set (vpage 45 | ||||
“Saving frequently used settings (Quick Select Function)”). | Information | |||
This operation can also be performed by | ||||
Troubleshooting | ||||
pressing a | on the main unit. | |||
Turning the Power Off | ||||
1 | Press | . | Specifications | |
The power is set to the standby mode. | ||||
|
| |||
2Press | . | |||
| ||||
The power indicator turns off, and so does the power.
NOTE | NOTE |
| |
Power continues to be supplied to some of the circuitry even when | |||
Insert the AC plugs securely. Incomplete connections could cause | |||
the power is in the standby mode. When leaving home for long periods | |||
noise. | |||
of time or when traveling, either press | to turn off the power, or | ||
| |||
unplug the power cord from the power outlet.