Listening to FM/AM Broadcasts
Basic Operation
1Set 
to “TUNER/AMP”.
2Press 
to select “TUNER”.
3Press 
to select “FM” or “AM”.
4Tune in the desired broadcast station.
qTo tune in automatically (Auto Tuning)
Press 
to light the “AUTO” indicator on
the display, then use 
to select the station you want to hear.
wTo tune in manually (Manual Tuning)
Press 
to turn off the display’s “AUTO” indicator, then use 
to select the station you want to hear.
•If the desired station cannot be tuned in with auto tuning, tune it in manually.
•When tuning in stations manually, press and hold 
to change frequencies continuously.
•The time (default : 30 sec) for which the
Presetting Radio Stations (Preset Memory)
Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset.
1Tune in the broadcast station you want to preset.
2Press 
.
3Press 
to select the block (A to G) in which the station is to be preset.
4Press 
to select the preset number (1 to 8).
5Press 
again to complete the setting.
•To preset other stations, repeat steps 1 to 5.
•Stations can be preset automatically at menu “Auto Preset” (vpage 33).
NOTE
Preset stations are erased by overwriting them.
|
|
| ENGLISH | ||
1Press |
| Playing Components | StartedGetting | ||
to select the memory block (A to G). | |||||
Listening to Preset Stations |
| ||||
Press | to select the desired preset channel (1 to | Connections | |||
28). |
|
|
| ||
n Default settings |
| Settings | |||
|
| Auto tuner presets | |||
|
|
| |||
A1 | ~ A8 | 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / |
| ||
90.1 MHz |
|
| |||
|
|
| Playback | ||
B1 | ~ B8 | 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, | |||
| |||||
90.1 / 90.1 MHz |
|
| |||
|
|
|
| ||
C1 | ~ C8 | 90.1 MHz |
| Remote | |
D1 | ~ D8 | 90.1 MHz |
| ||
|
| ||||
E1 | ~ E8 | 90.1 MHz |
|
| |
F1 | ~ F8 | 90.1 MHz |
| Control | |
G1 | ~ G8 | 90.1 MHz |
| ||
| Information | ||||
You can also operate via the main unit. In this | |||||
| |||||
case, perform the following operations. |
| ||||
• Press | , then turn | on the main | Troubleshooting | ||
unit to select the preset radio channel. | |||||
| |||||
|
|
|
| Specifications | |
3