Denon AVR-1610 manual 34

ENGLISH

Getting

Changing the Input Sources Assigned to the Input Connectors

Started

(Assign)

Default settings are underlined.

Connections

Assign input sources to input

HDMI : The

DVD

HDP

TV

SAT/CBL VCR

DVR

V.AUX

input

Setting items

Setting contents

Input Assign (HDMI)

connectors.

sources are assigned to the HDMI input connectors as shown below.

Settings

• HDMI1 / HDMI2 / HDMI3

input source.

• None : Do not assign an HDMI input connector to the currently selected

b Upon purchase, the settings of the different input sources are as shown

Playback

below.

Input

DVD

HDP

TV

SAT/CBL

VCR

DVR

V.AUX

source

ControlRemote

Default

HDMI1

HDMI2

None

HDMI3

None

None

None

setting

• When HDMI is assigned to an input source, the audio signal switches

Information

to HDMI along with the video signal. To use with the digital audio

input connectors assigned, set menu “Input Mode” (vpage 32) to

“Digital”.

• When the AVR-1610 and TV are connected with an HDMI cable, if the

TV is not compatible with HDMI audio signal playback, only the video

Troubleshooting

signals are output to the monitor.

When “HDMI Control” is set to “ON”, HDMI cannot be assigned to “TV”

• The audio signals input from the analog, digital and EXT. IN connectors

are not output to the TV.

NOTE

Specifications

at the “HDMI” settings (vpage 27).

Input Assign (Digital)

Digital : The

DVD

HDP

TV

SAT/CBL

VCR

DVR

V.AUX

input

Assign input sources to input

sources are assigned to the digital audio input connectors as shown

connectors.

below.

• C1 (COAXIAL) / O1 (OPT1) / O2 (OPT2)

• None ： Do not assign a digital input connector to the currently selected

input source.

b Upon purchase, the settings of the different input sources are as shown

below.

Input source

DVD

HDP

TV

SAT/CBL

VCR

Default setting

None

None

OPT1

COAXIAL

None

Input source

DVR

V.AUX

Default setting

OPT2

None

			Making the input settings (Input Setup)
Setting items			Setting contents
Input Assign (Component)
	Component : The	DVD	HDP	TV	SAT/CBL	VCR	DVR	V.AUX
Assign input sources to input	input sources are assigned to the component video input connectors as
connectors.
	shown below.
	● COMP1 (Component video 1 input connector) / COMP2 (Component
	video 2 input connector)
	● None : Do not assign the component video input connectors to the currently
	selected input source.

b Upon purchase, the settings of the different input sources are as shown

	below.
	Input
				DVD	HDP	TV	SAT/CBL	VCR		DVR	V.AUX
	source
	Default		COMP1		None	None	None	None	COMP2		None
	setting
iPod Dock
	The control dock for iPod can be assigned to the							DVD	SAT/CBL		VCR
Change the input source to
which the control dock for	DVR	V.AUX		input sources.
	Assign	: Assign		the currently selected input source to the Control Dock for

iPod is assigned.

iPod input.

None : Do not assign the currently selected input source to the Control Dock for iPod input.

• With the default settings, the control dock for iPod can be used connected to the VCR (iPod) connector.

•Even if “iPod Dock” is set to “Assign”, if AVR-1610 and control dock for iPod are not connected, the input is used as the normal input source.

31	Remote control	:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
	operation buttons
			Cancel the menu