Denon AVR-1610 manual 28

ENGLISH

Getting
			Setting items					Setting contents
Started
	Speaker Config.							Surround : Set the presence and size of the Surround speakers.
	Select speaker configuration							• Large : Use of a large speaker that can adequately play back low
	and size.							frequencies.
Connections
	(bass reproduction capability)							• Small : Use of a small speaker that has inadequate playback capacity for
								low frequencies.
								• None : Select when the surround speakers are not connected.
								“Large” is not displayed when “Front” is set to “Small”.
Settings
		“S.Back” is			displayed			S.Back (Pre out) : Set the presence, size and number of surround back
								speakers.
		when		the “Pre Assign”
								• Large : Use of a large speaker that can adequately play back low
		setting		(vpage		24)	is
Playback								frequencies.
		set to “Normal”.
								• Small : Use of a small speaker that has inadequate playback capacity for
								low frequencies.
Remote								• None : Select when the surround back speakers are not connected.
								• 2ch : Use two surround back speakers.
								• 1ch : Use only one surround back speaker. Surround back audio is output
Control								from the SURR. BACK / FRONT HEIGHT PRE OUT “L” connector.
								• “Large” is not displayed when “Surround” is set to “Small”.
Information								• Even if “S.Back” is set to “Large”, the “S.Back” setting is automatically
								switched to “Small” if “Surround” is set to “Small”.
								NOTE
								Even when the Surround Back Speaker setting is other than “None”,
Troubleshooting								sound may not be emitted from the surround back speaker, depending
								on the playback source. In this case, “Surround Back” setting other
		“Front		Height”			is	than “OFF” (vpage 40).
								Front Height (Pre out) : Set the front height speaker size.
		displayed when the “Pre
								• Large : Use of a large speaker that can adequately play back low
		Assign” setting (vpage
								frequencies.
		24)	is	set	to	“Front
Specifications								• Small : Use of a small speaker that has inadequate playback capacity for
		Height”.
								low frequencies.
								• None : Select when a front height speaker is not connected.
		NOTE						• “Large” is not displayed when “Front” is set to “Small”.
	Select “Large” or “Small” not							• Even if “Front Height” is set to “Large”, the “Front Height” setting
	according to the physical size							is automatically switched to “Small” if “Front” is set to “Small”.
	of the speaker but according
	to		the	low	frequency
	reproduction				capabilities
	based on the frequency set
	at	“Crossover			Frequency”
	(vpage 26).

			Making detailed settings (Manual Setup)
Setting items			Setting contents
Bass Setting			Subwoofer Mode : Select low range signal to be reproduced by
Make the settings related to			subwoofer.
playback of	low frequency		• LFE : Add the low frequency signal of the channel for which the speaker
signals (subwoofer and LFE).			size is set to “Small” to the subwoofer signal and output it.
This can	be	set when	• LFE+Main : Add the low frequency signal of all channels to the subwoofer
			signal and output it.
“Speaker	Config.” –
“Subwoofer”		(vpage	• Play music or a movie source and select the mode offering the
24) is set to “Yes”.			strongest bass.

•Select “LFE+Main” if you want the bass signals to always be produced from the subwoofer.

		LPF for LFE : Set the upper limit of the low frequency signals output from
		the subwoofer.
		• 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
Distance		Unit : Set the unit of distance.
Set the distance from	the	• Feet
listening position to	the	• Meters
speakers.		Step : Set the minimum variable width of the distance.
Measure the distance from		• 1ft / 0.1ft
the listening position to the		• 0.1m / 0.01m
speakers beforehand.		• FL (Front L)/ FR (Front R)/ C (Center)/ SW (Subwoofer)/ SL (Surround L)/

SR (Surround R/ SBL (Surr. Back L)/ SBR (Surr. Back R)/ FHL (Front Height L)/ FHR (Front Height R) : Select the speaker you want to set, and set the distance. Set the value that is closest to the measured distance.

• 0.0ft ~ 60.0ft / 0.00m ~ 18.00m

• The speakers that can be selected differ depending on the “Pre Assign” (vpage 24) and “Speaker Config.” settings.

• Default settings :

Front/Center/Subwoofer/Front Height : 3.6 meters (12 feet)

Surround/Surr. Back : 3.0 meters (10 feet)

NOTE

Set the difference in the distance between the speakers to less than 6.0 meters (20 feet). “Relocate Speaker” is displayed on the screen if an inappropriate distance is set.

Default : Reset all distance settings to factory default.

• Yes : Reset to the defaults.

• No : Do not reset to the defaults.

25	Remote control	:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
	operation buttons
			Cancel the menu