![](/images/backgrounds/19711/19711-6039x1.png)
Basic Operation
Setting the tone control
Adjust the bass and treble to suit your tastes.
¢Adjusting the tone
1 Press SURROUND PARAMETER.
2 Press D H to select “TONE DEF. ON”.
In the direct mode, “TONE” cannot be selected.
3 Press G to select “OFF”.
4 Press D H to select “Bass” or “Treble”, then press F G to set the level.
Can be adjusted within the range of
5 Press ENTER or SURROUND PARAMETER.
1
R O O M S I Z E M E D
2 |
|
|
|
|
|
|
|
|
|
|
| T O N E D E F . O N |
|
| |||||||
|
|
|
|
| ||||||
|
| 3 |
|
|
|
|
|
|
| |
|
|
| ||||||||
|
| T O N E D E F . O F F |
|
| ||||||
|
|
|
|
|
|
|
| |||
|
|
| 4 |
|
|
|
| |||
|
|
| ||||||||
|
|
|
| B A S S | 0 d B |
| ||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| T R E B L E | 0 d B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
¢When you do not want to adjust the tone
Set “Tone Defeat” to “ON” at step 3 in “Adjusting the tone”.
Adjusting the speaker volume
1 Press [CH SELECT].
2 Press [CH SELECT] to select the speaker.
The settable speaker switches each time this button is pressed.
3 Press [F G] to adjust the volume.
The SW channel level can be turned off by decreasing it one step from
OFF ´
ENGLISH
Basic Operation
Listening to the radio
Check that the remote control unit is set to “AUDIO”.
Auto preset memory
This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory.
1 Switch off the unit using <POWER>.
2 Hold <PRESET •> and press <POWER>.
• The unit automatically begins searching for FM broadcast stations.
When the first FM broadcast station is found, that station is stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory operation is completed.
•If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.
•To interrupt this function, press <ON/STANDBY>.
¢Default settings
|
|
| Auto tuner presets | |
A1 | ~ A8 | 87.5 | / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / | |
90.1 | MHz | |||
|
| |||
|
|
| ||
B1 | ~ B8 | 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, | ||
90.1 / 90.1 MHz | ||||
|
| |||
|
|
|
| |
C1 | ~ C8 | 90.1 | MHz | |
|
|
|
| |
D1 | ~ D8 | 90.1 | MHz | |
|
|
|
| |
E1 | ~ E8 | 90.1 | MHz | |
|
|
|
| |
F1 | ~ F8 | 90.1 | MHz | |
|
|
|
| |
G1 | ~ G8 | 90.1 | MHz | |
|
|
|
|
36
ENGLISH