ENGLISH
Basic Operation
<INPUT SELECTOR> BAND SHIFT
CHANNEL TUNING STATUS
SHIFT 
CHANNEL
[FM/AM] 
[XM RADIO]
STATUS
D H F G
[TUNER]
TUNING 
[MODE] 
BAND 
[MEMORY] 
D H F G
About the button names in this explanation
<> : Buttons on the main unit
[ | ] : Buttons on the remote control unit |
Button name only :
Buttons on the main unit and remote control unit
Auto tuning
1 Use <INPUT SELECTOR> to select “TUNER” or press [TUNER].
2 Press BAND to select “AM”, “FM” or “XM”.
When listening to the XM Satellite Radio ( 
page 38).
3 Press [MODE] to set the auto tuning mode.
• The “AUTO” indicator lights.
4 Press TUNING.
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the “Manual tuning” operation.
• “AM” or “FM” can be selected directly by pressing [FM/AM].
Manual tuning
1 Use <INPUT SELECTOR> to select “TUNER” or press [TUNER].
2 Press BAND to select “AM”, “FM” or “XM”.
When listening to the XM Satellite Radio ( 
page 38).
3 Press [MODE] to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
4 Press TUNING.
The frequency changes continuously when the button is held in.
•When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.
•“AM” or “FM” can be selected directly by pressing [FM/AM].
Basic Operation
Preset memory
1 Use the “Auto tuning” or “Manual tuning” operation to tune in the station to be preset in the memory.
2 Press [MEMORY].
3 PressG). SHIFT to select the desired memory block (A to
4 Press CHANNEL to select the desired preset channel (1 to 8).
5 Press [MEMORY] again.
• Store the station in the preset memory.
• To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations (channels 1 to 8) in each of blocks A to G.
• The memory block can also be selected by pressing SHIFT.
Recalling preset stations
1 Press SHIFT to select the memory block.
2 Press CHANNEL to select the desired preset channel.
37
ENGLISH