Advanced Operation

Multi zone music entertainment system

•ZONE2 speaker out can be used when “ZONE2” is selected at “Power Amp Assignment”. In this case, surround back speaker out cannot be used for MAIN ZONE.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

•The main zone output can be turned on and off with [MAIN].

¢When using the SURR.BACK/ZONE2 amplifier as the ZONE2

•To use the ZONE2, turn on ZONE2.

•The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit’s [VOLUME](ZONE2).

•The input source selected with INPUT SELECTOR is output for the ZONE2 speaker output.

[System configuration and connections example]

Using this unit’s internal amplifier as the ZONE2.

 

MAIN ZONE 5.1-channel systems

 

Monitor

FL

ZONE2

FR

 

C

DVD player

AVR-587

 

SW

 

Input

 

ZONE2 SPEAKER OUT

SL

SR

SYSTEM REMOTE

CONTROL UNIT RC-1048

: Speaker cable

Refer to “Connections” ( page 14).

ENGLISH

Advanced Operation

Remote control unit operations during multi- source playback (selecting the source)

This is only possible when the main unit in the ZONE2 mode ( page 23).

1 Set [MODE SELECTOR 1] to the “AUDIO”.

2 Set [MODE SELECTOR 2] to the “ZONE2”.

3 Press [ZONE2 ON].

• The ZONE2 indicator lights.

To cancel the ZONE2 mode:

Press [ZONE2 OFF].

4 The output level of the ZONE2 SPEAKER OUT terminals can be controlled pressing [VOLUME].

Default setting (ZONE2 volume level):

–– – dB (Minimum)

•The input source selected for the main zone is output to ZONE2.

42

ENGLISH