ENGLISH

INPUT SELECTOR

VIDEO SELECT

Advanced Operation

Night mode

 

Calling the settings out

The night mode can be set when playing Dolby Digital sources. The

 

Press <USER MODE> at which the settings you want to

dialogues are easier to hear at night and when listening with the

volume low.

call out are stored.

 

 

 

<USER MODE> STATUS

INPUT SELECTOR

Press [NIGHT].

Canceling night mode: Press [NIGHT] again.

When the night mode is set to “ON”, the “D.COMP” surround parameter can not be selected.

Combining the currently playing sound with the desired image (VIDEO SELECT function)

Press VIDEO SELECT until the desired image appears on the monitor.

ENTER

[NIGHT]

VIDEO SELECT

STATUS

[D H F G]

INPUT SELECTOR

[MODE]

[MEMORY] [ENTER]

[D H F G]

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

User mode function

The AVR-587 is equipped with a function for storing the selected input source, the auto surround mode and input mode in the memory and selecting these settings when you want to use them.

Storing the settings in the memory

1 The following are stored in the memory: q Currently set input source

w Currently set surround mode e Currently set input mode

2 Press <USER MODE> until “Memory” is displayed.

To cancel, press VIDEO SELECT to select “SOURCE”.

The video source selected with the video select function is stored in the memory for the different input sources.

Personal memory plus function

The surround mode last selected and the input mode setting are stored individually for the different input sources.

The surround parameters, tone control settings and playback level balance for the different output channels are memorized for each surround mode.

39

ENGLISH