Denon AVR-591 Set up, Press AMP, 5 Proceed to page, 2-channelconnection, “ Preparation ” step, the remote control unit, nn Set up the operation mode, NOTE, Connect

ENGLISH

Connect

Set up speakers around items indicate the settings.

2.1-channel/2-channel connection	Here we describe how to set up speakers other than 5.1-channel speakers.
	For the method of setting up 5.1-channel speakers, see “Simple version”, “Set up speakers (Audyssey® Auto Setup)” (vpage 6).

First install and connect the speakers to this unit.

Simple

1	Set up
	the remote control unit

nn Set up the operation mode

Press AMP to set the remote control unit to amplifier operation mode.

FL	FR
SW	Press AMP

2 Connect the setup microphone.

When the setup microphone is connected, the following screen is displayed.

3-1.Audyssey Auto Setup MultEQ

Please place microphone at ear height at

main listening position.

Pre Assign:

Normal Start

Cancel [ENT]:Select [RTN]:Back

3 Use ui to select “Pre Assign”.

4 Use o p to select the configuration of the connected speakers.

	Set for connecting the
Normal
	surround Back speakers to
	the SURR. BACK/FRONT
	HEIGHT connector in PRE
	OUT.
	Set for connecting the
Front Height
	front height speakers to
	the SURR. BACK/FRONT
	HEIGHT connector in PRE
	OUT.

5 Proceed to page 8“ Preparation ” step 5.

NOTE

After performing Audyssey Auto Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform Audyssey Auto Setup again.

version

version Basic

version Advanced

2-channel connection

For 2-channel playback, disconnect the subwoofers.

3-1.Audyssey Auto Setup MultEQ Please place microphone

at ear height at

main listening position.

Pre Assign:

Normal

Start

Cancel

[RTN]:Back

Information

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	29
buttons	(Up/Down/Left/Right)