Denon AVR-591 DVD, SAT, Yes, DVD, None, NOTE, Auto, Game, DOCK, Auto, HDMI, Comp1, ENTER, ENTER, V.SEL, V.SEL, Basic, Movie, V.AUX, Source, Simple, Analog, SAT/CBL

Setting items

Setting details

Component

Comp1 (Component video)

Set this to change the

None : Do not assign a component video input connector to the selected

component video input

input source.

connectors assigned to the

input sources.

• At time of purchase, the settings of the different input sources are as

shown below.

DVD

SAT/CBL

GAME

Input source

DVD

SAT/

GAME

V.AUX

DOCK

CBL

V.AUX

DOCK

Default

None

Component

None

setting

• An input source to which an component video input connector cannot be

assigned is displayed as “–”.

• Even if a component input connector is assigned to the input source

“DOCK”, “DOCK” is effective when a control dock for iPod is connected.

Default

Yes : Reset to the defaults.

The “Input Assign” settings

No : Do not reset to the defaults.

are returned to the default

If you select “Default” and press ENTER, the message “Default

settings.

Setting?” is displayed. Select “Yes” or “No”, and then press ENTER.

Video

Default settings are underlined.

Set the source video.

zz“BD”, “TV” or “GAME” can be set when “HDMI” (vpage 38) or “Component” (vpage 39) has been assigned.

	Setting items	Setting details

	Video Select	Source : Play the picture and sound of the input source.
	Video of another input	BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK : Select video input
	source is played back	source to view. This can be set for individual input sources.
	combined with the playing	“BD”, “TV” and “GAME” can be selected only when a component
	audio.	“BD”, “TV” and “GAME” can be selected only when a component
	audio.	video connector is assigned as an input source.
		video connector is assigned as an input source.

NOTE

•It is not possible to select HDMI input signals.

•Input sources for which “Delete” is selected at “Source Delete” (vpage 49) cannot be selected.

ENGLISH

Input Setup

Simple

Video Select

Setting details

Setting items

(Continued)

Buttons on the remote control unit or main unit

version

can be used for operations.

GOperations with the remote control unitH

Press V.SEL until the desired picture appears.

• To cancel, press V.SEL to select “Source”.

GOperations with the main unitH

Press VIDEO SELECT until the desired

Basic

picture appears.

• To cancel, press VIDEO SELECT to

select “Source”.

version

Video Mode

Auto : Process video automatically based on the HDMI content

Make settings for video

information.

processing.

Movie : Process video normally.

Game : Always process video appropriate for game content.

DVD

SAT/CBL

GAME

If “Video Mode” is set to “Auto”, the mode is switched according to

the input contents.

V.AUX

DOCK

Advanced

Input Mode

Default settings are underlined.

The input modes available for selection may vary depending on the input source.

version

Setting items

Setting details

Input Mode

Auto : Automatically detect input signal and perform playback.

Set the audio input modes

HDMI : Play only signals from HDMI input.

for the different input

Digital : Play only signals from digital input.

sources.

Analog : Play only signals from analog input.

• “HDMI” can be set for input sources for which “HDMI” is assigned at

“Input Assign” (vpage 38).

• “Digital” can be set for input sources for which “Digital” is assigned at

“Input Assign” (vpage 38).

• If the input source is set to “TV” or “Game”, it cannot be set to “Analog”.

• When digital signals

are properly input, the

indicator

lights on

the display. If the

indicator does not light, check the digital input

connector assignment and the connections.

Information

• If “HDMI Control” is set to “ON” and a TV compatible with the ARC is

connected via the HDMI MONITOR connectors, the input mode whose

input source is “TV” is fixed to ARC.

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	39
buttons	(Up/Down/Left/Right)