ENGLISH

Manual Setup

Setting items

Setting details

 

 

Channel Level

Test Tone Start : Output test tone.

Set the volume of the test

• FL / C / FR / SR / SBRz / SBLz / SL / FHL / FHR / SW : Select the

tone to be the same when it

speaker.

is output from each speaker. zz When the “Speaker Config.” – “S.Back” setting (vpage 47) is set to “1sp”, “S.Back” is displayed.

• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.

• When o is pressed while the subwoofer volume is set to “–12 dB”, the “Subwoofer” setting switches to “OFF”.

• When “Channel Level” is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 31.

HDMI Setup

Default settings are underlined.

Make settings for HDMI video/audio output.

 

 

Setting items

Setting details

 

 

Auto Lip Sync

ON : Compensated.

Make automatic

OFF : Not compensated.

compensation for timing

 

shift in audio and video

 

output.

 

HDMI Audio Out

Amp : Play back through speakers connected to the receiver.

Select HDMI audio output

TV : Play back through TV connected to the receiver.

device.

When the HDMI control function is activated, priority is given to the TV

 

audio setting (vpage 30 “HDMI control function”).

NOTE

• Speakers set to “None” in the “Speaker Config.” (vpage 46) settings are not displayed.

 

• When a headphones jack is inserted in the PHONES jack of this unit, the

 

“Channel Level” is not displayed.

 

Default : The “Channel Level” settings are returned to the default settings.

 

• Yes : Reset to the defaults.

 

• No : Do not reset to the defaults.

Crossover Frequency

Crossover : Set the crossover frequency.

HDMI Control

You can link operations with devices connected to HDMI and compatible with HDMI Control.

ON : Use HDMI control function.

OFF : Do not use HDMI control function.

•When a device that is not compatible with the HDMI control function is connected, set “HDMI Control” to “OFF”.

•Please consult the operating instructions for each connected component to check the settings.

•Refer to “HDMI control function” (vpage 30) for more information about the HDMI control function.

Set the maximum frequency

• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /

of the bass signal output

250Hz

from each channel to

Advanced : Specify crossover frequency for each speaker.

the subwoofer. Set the

• Front / Center / Surround / S.Back

/ Front Height : Select the speaker.

Crossover Frequency to

• 40Hz/ 60Hz / 80Hz / 90Hz / 100Hz/ 110Hz / 120Hz / 150Hz / 200Hz /

suit the bass reproduction

capability of the speaker

250Hz : Set the crossover frequency.

 

being used.

 

 

• “Crossover Frequency” can be set when the “Bass Setting” –

 

“Subwoofer Mode” (vpage 47) setting is “LFE+Main”, or when you

 

have a speaker that is set to “Small”.

 

• Always set the crossover frequency to “80Hz”. When using small

 

speakers, however, we recommend setting the crossover frequency to

 

a higher frequency.

 

• For speakers set to “Small”, sound below the crossover frequency

 

is cut from the sound output. The cut bass sound is output from the

 

subwoofer or front speakers.

 

• The speakers that can be set when “Advanced” is selected differ

 

according to the “Subwoofer Mode” setting (vpage 47).

 

• When “LFE” is selected, speakers set to “Small” at “Speaker Config.”

 

can be set. If the speakers are set to “Large”, “Full Band” is displayed

 

and the setting cannot be made.

 

• If set to “LFE+Main”, this setting can be made regardless of the

 

speaker size.

NOTE

• When “HDMI Control” is set to “ON”, it consumes more standby power. If you are not using this unit for an extended period, it is

 

recommended that you unplug the power cord from the power outlet.

 

• “HDMI Control” does not work when the power to the equipment is off.

 

Either turn power on or set to standby.

 

• The HDMI control function controls operations of a TV that is compatible

 

with the HDMI control function. Make sure that the TV and HDMI are

 

connected when you perform HDMI control.

 

• If the “HDMI Control” settings have been changed, always reset the

 

power to connected devices after the change.

Standby Source

Last : This item is set at the last-used input source.

Sets the HDMI input source

HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into

to put into standby when

standby.

the power is on.

“Standby Source” can be set when “HDMI Control” is set to “ON”.

 

Power Off Control

All : If power to a connected TV is turned off independently of the input

Links the power standby

source, power to this unit is automatically set to standby.

of this unit to external

Video : If power to a connected TV is turned off when the input source

equipment.

is BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK, power to this unit is

 

automatically set to standby.

 

OFF : This unit does not link with power to a TV.

“Power Off Control” can be set when “HDMI Control” is set to “ON”.

48

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

buttons

(Up/Down/Left/Right)