Sleep timer function

The power automatically goes into standby once the set time has elapsed.

This is convenient for playing sources while going to sleep.

Press SLEEP and display the time you want to set.

The “SLEEP” indicator on the display lights.

• The time switches as shown below each time SLEEP is pressed.

OFF 10 min 20 30 40 50

120 110 100 90 80 70 60

To cancel the sleep timer

Press SLEEP to set “OFF”.

The “SLEEP” indicator on the display turns off.

•The sleep timer setting is canceled if this unit’s power is set to standby or turned off.

• If SLEEP on the main unit is pressed, the same function as with the remote control unit can be obtained.

Adjusting the volume of the speakers

You can adjust the channel level either according to the playback sources or to suit your taste, as described below.

nnAdjusting the volume of the different speakers1 Press AMP to set the remote control unit to amplifier operation mode.2 Press CH LEVEL.

Channel Level

FL

0.0dB SR

0.0dB

C0.0dB SBR 0.0dB

FR

0.0dB

SBL

0.0dB

SW

0.0dB

SL

0.0dB

 

 

Fader

 

 

 

FRONT

: REAR

[

]:CH Sel.

 

3 Use ui to select the speaker. The speaker that can be set switches each time one of the buttons is pressed.

4 Use o p to adjust the volume.

•In the case of a subwoofer, pressing o when it is at “–12 dB” will change the setting to “OFF”.

When a headphone jack is inserted, the headphone channel level can be adjusted.

 

 

ENGLISH

 

 

Convenient functions

 

nnAdjusting the volume of groups of speakers

Simple

(Fader function)

 

This function lets you adjust (fade) the sound all at once from the

version

front (front speaker / front height speaker / center speaker) or rear

(surround speaker / surround back speaker).

Press AMP to set the remote

 

1 control unit to amplifier operation

 

mode.

 

 

Basic

2 Press CH LEVEL.

 

 

version

 

Channel Level

 

FL

0.0dB SR

0.0dB

 

C0.0dB SBR 0.0dB

FR

0.0dB SBL

0.0dB

SW

0.0dB SL

0.0dB

 

Fader

 

FRONT : REAR

[

]:CH Sel.

 

Use i to select“Fader”, then

 

 

versionAdvanced

3 select the item to be adjusting

using o p.

 

4 Use o p to adjust the volume of the speakers. (o : front, p: rear)

•The fader function does not affect the subwoofer.

•The fader can be adjusted until the volume of the speaker adjusted to the lowest value is –12 dB.

Information

31