Denon AVR-791 the, mode, NOTE, Basic, Set up, Set up, Simple, direct mode, Information, the subwoofer, the microphone, main listening position, subwoofer as shown below

ENGLISH

Set up speakers (Audyssey® Auto Setup)

About setup microphone placement

1

Set up

2

Set up

Simple

version

• Measurements are performed by placing the setup microphone successively at multiple positions

the microphone

the subwoofer

throughout the entire listening area, as shown in GExample qH. For best results, we recommend you

Mount the setup microphone on a

If using a subwoofer capable of the

measure in six positions, as shown in the illustration (up to six positions).

tripod or stand and place it in the

following adjustments, set up

the

• Even if the listening environment is small as shown in GExample wH, measuring at multiple points

main listening position.

subwoofer as shown below.

throughout the listening environment results in more effective correction.

When placing the setup microphone, adjust

nn When using a subwoofer with a direct

Basic

GExample qH

GExample wH

the height of the sound receptor part to the

FL SW C

FR

FL SW C

FR

level of the listener’s ear.

mode

Set the direct mode to “On” and disable the

version

Sound receptor

setting.

Setup

volume adjustment and crossover frequency

(

: Measuring positions)

( : Measuring positions)

microphone

nn When using a subwoofer without a

direct mode

Make the following settings:

• Volume : “12 o’clock position”

• Crossover frequency :

“Maximum/Highest Frequency”

SL

*M

SR

SL

*M

SR

• Low pass filter : “Off”

• Standby mode : “Off”

Advanced

FL

Front speaker (L)

SW Subwoofer

FR

Front speaker (R)

SL

Surround speaker (L)

version

C

Center speaker

SR

Surround speaker (R)

NOTE

About the main listening position (*M)

• Do not hold the setup microphone in your hand

The main listening position is the position where listeners would normally sit or where one would

during measurements.

• Avoid placing the setup microphone close to a

normally sit alone within the listening environment. Before starting Audyssey Auto Setup, place the setup

seat back or wall as sound reflections may give

microphone in the main listening position. Audyssey MultEQ® uses the measurements from this position

inaccurate results.

to calculate speaker distance, level, polarity, and the optimum crossover value for the subwoofer.

Information

The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers. 7

See page 30 for the installation, connection and setup methods for speakers other than 5.1-channel speakers.