Set the items below to the settings you want to save.

ENGLISH

Convenient functions

Quick select function

All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same.

nnSaving the settings

1 q Input source (vpage 20) w Volume (vpage 20)

e Surround mode (vpage 26) r Video Select (vpage 45)

tAudyssey Setting

(MultEQ®, Dynamic EQ®, Dynamic

Volume™) (vpage 49)

2 Press and hold the desired QUICK SELECT until “Memory” appears on the display.

The current settings will be memorized.

GQuick Select DefaultsH

 

Input Source

Volume

QUICK SELECT 1

BD

–40 dB

QUICK SELECT 2

SAT/CBL

–40 dB

QUICK SELECT 3

DOCK

–40 dB

nnRecalling the settingsPress QUICK SELECT at which the settings you want to call out are saved.

The , or indicator illuminates on the display.

•The Quick Select function can be set separately for the different zones (vpage 38 “Quick select function”).

•If QUICK SELECT on the main unit

is pressed, the same function as with the remote control unit can be obtained.

NOTE

Input sources stored with the quick select function cannot be selected if they have been deleted at “Source Delete” (vpage 57). In this case, store them again.

Various memory functions

nnPersonal memory plus function

This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay etc.) last selected for the individual input sources.

The surround parameters, tone settings and the volumes of the different speakers are stored for the individual surround modes.

nnLast function memory

This function stores the settings which were made before going into the standby mode.

When the power is turned back on, the settings are restored.

Naming quick select settings

See “Quick Select Name” (vpage 57).

36