Denon AVR-791 Turn on power, Set up speakers, (Audyssey® Auto Setup), ENGLISH, •• When, Power on, Power on, Power on, EQ®/Dynamic, 2 this unit, 3 to the unit

ENGLISH

3

Turn on power

4

Set up speakers

1

2

3

4

5

(Audyssey® Auto Setup)

1

2

3

4

5

1 power.Turn on the TV and subwoofer

The acoustic characteristics of the connected speakers and listening room are

measured and the optimum settings are made automatically. This is called

“Audyssey Auto Setup”.

To perform measurement, place the setup microphone in multiple locations all

around the listening area. For best results, we recommend you measure in six

positions, as shown in the illustration (up to six positions).

Power on

•• When

performing Audyssey Auto Setup, MultEQ®/Dynamic

EQ®/Dynamic

Volume™ functions become active (vpage 49, 50).

•• To set up the speakers manually, use “Speaker Setup” (vpage 52) on the menu.

Change the TV input to the input of

2 this unit.

NOTE

Press POWER ON to turn on power

• Make the room as quiet as possible. Background noise can disrupt the room measurements. Close

windows, silence cell phones, televisions, radios, air conditioners, fluorescent lights, home appliances,

3 to the unit.

light dimmers, or other devices as measurements may be affected by these sounds.

The power indicator flashes green and the

• Cell phones should be placed away from all audio electronics during the measurement process as Radio

power turns on.

Frequency Interference (RFI) may cause measurement disruptions (even if the cell phone is not in use).

Power on

• Do not unplug the setup microphone from the main unit until Audyssey Auto Setup is completed.

• Do not stand between the speakers and setup microphone or allow obstacles in the path while the

measurements are being made. This will cause inaccurate readings.

• Loud test sounds may be played during Audyssey Auto setup. This is part of

normal operation. If there is background noise in room, these test signals will

increase in volume.

• Operating VOL dfduring the measurements will cancel the measurements.

• Measurement cannot be performed when headphones are connected.

Power on

6 The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers.

See page 30 for the installation, connection and setup methods for speakers other than 5.1-channel speakers.