Denon AVR-791 Connections, NOTE, NOTE, Basic, Simple, version, Information, version Advanced, in Set as Necessary, GFlow of video signals for MAIN ZONEH

ENGLISH

Connections

Simple

Important information

•Connect this unit as follows before using. Make connections according to the equipment you are connecting.

•Some settings of this unit may be necessary depending on the connection method. Check each connection item for more information.

•Select the cables (sold separately) according to the components being connected.

NOTE

•Do not plug in the power cord until all connections have been completed.

•When making connections, also refer to the operating instructions of the other components being connected.

•Be sure to connect the left and right channels properly (left with left, right with right).

•Do not bundle power cords together with connection cables. Doing so can result in noise.

version

Basic

Converting input video signals for output (Video conversion function)

version

This unit is equipped with four types of video input connectors (HDMI, Component video, S-Video and video) and two types of video output connectors (HDMI and video).

Use the connectors corresponding to the components to be connected.

This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor.

	GFlow of video signals for MAIN ZONEH
Video device		This unit	Monitor
			Monitor

	Input	Output
Output	(IN)	(MONITOR OUT)	Input
HDMI connector	HDMI connector	HDMI	HDMI connector
		connector
Component video	Component video
connectors	connectors

•The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats.

•The resolution of the video signal input to this unit’s HDMI connector is the resolution set at “Resolution” (vpage 45) (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the setting).

•Resolutions of HDMI-compatible TVs can be checked at “HDMI Monitor Information” (vpage 59).

NOTE

•HDMI signals cannot be converted into analog signals.

•When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate.

•Component video input signals cannot be converted into Video format.

version Advanced

S-Video connector	S-Video connector
Video connector	Video connector	Video connector	Video connector

in Set as Necessary

Set when changing the resolution of the video signal. “Resolution” (vpage 45)

Information