ENGLISH
Manual Setup
Setting items | Setting details |
|
|
Channel Level | Test Tone Start : Output test tone. |
Set the volume of the test | • FL / C / FR / SR / SBRz / SBLz / SL / FHL / FHR / SW : Select the |
tone to be the same when it | speaker. |
is output from each speaker. zz When the “Speaker Config.” – “S.Back” setting (vpage 53) is set to “1sp”, “S.Back” is displayed.
•
• When o is pressed while the subwoofer volume is set to
• When “Channel Level” is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 35.
NOTE
• Speakers set to “None” in the “Speaker Config.” (vpage 52) settings are not displayed.
| • When a headphones jack is inserted in the PHONES jack of this unit, the |
| “Channel Level” is not displayed. |
| Default : The “Channel Level” settings are returned to the default settings. |
| • No : Do not reset to the defaults. |
| • Yes : Reset to the defaults. |
Crossover Frequency | Crossover : Set the crossover frequency. |
Set the maximum frequency | • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / |
of the bass signal output | 250Hz |
from each channel to | Advanced : Specify crossover frequency for each speaker. | |||
the subwoofer. Set the | ||||
• Front / Center / Surround / S.Back | / Front Height : Select the speaker. | |||
Crossover Frequency to | ||||
• 40Hz | / 60Hz / 80Hz / 90Hz / 100Hz | / 110Hz / 120Hz / 150Hz / 200Hz / | ||
suit the bass reproduction | ||||
capability of the speaker | 250Hz : Set the crossover frequency. |
| |
being used. |
|
| • “Crossover Frequency” can be set when the “Bass Setting” – |
| “Subwoofer Mode” (vpage 53) setting is “LFE+Main”, or when you |
| have a speaker that is set to “Small”. |
| • Always set the crossover frequency to “80Hz”. When using small |
| speakers, however, we recommend setting the crossover frequency to |
| a higher frequency. |
| • For speakers set to “Small”, sound below the crossover frequency |
| is cut from the sound output. The cut bass sound is output from the |
| subwoofer or front speakers. |
| • The speakers that can be set when “Advanced” is selected differ |
| according to the “Subwoofer Mode” setting (vpage 53). |
| • When “LFE” is selected, speakers set to “Small” at “Speaker Config.” |
| can be set. If the speakers are set to “Large”, “Full Band” is displayed |
| and the setting cannot be made. |
| • If set to “LFE+Main”, this setting can be made regardless of the |
| speaker size. |
Setting items | Setting details | |
|
| |
Front Speaker Setup | DIRECT/STEREO : The front speakers used in the direct, stereo and pure | |
Set the front speakers to | direct play modes (2 channel) are set in advance. | |
use for every surround | • A：Front speaker A is used. | |
mode. | • B：Front speaker B is used. | |
NOTE | • A+B：Both front speakers A and B are used. | |
MULTI CH : The front speakers used in modes other than the direct, | ||
This can be set when “Amp | ||
stereo and pure direct play modes (2 channel) are set in advance. | ||
Assign” is set to “Front B” | • A：Front speaker A is used. | |
(vpage 52). | • B：Front speaker B is used. | |
| • A+B：Both front speakers A and B are used. |
54 | Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | |
buttons | (Up/Down/Left/Right) | ||||
|
|
|