ENGLISH

Playback (Basic operation)

nn Selecting the input source (vpage 20) nn Adjusting the master volume (vpage 20)

nn Turning off the sound temporarily (vpage 20)nn Playing a Blu-ray Disc player/DVD player (vpage 21)nn Playing a CD player (vpage 21) nn Playing an iPod® (vpage 21)nn Tuning in radio stations (vpage 24)nn Playing a USB memory device (vpage 25)Selecting a listening mode (Surround mode)(vpage 26)Playback (Advanced operation) (vpage 34)

Important information

Before starting playback, make the connections between the different components and the settings on the receiver.

NOTE

Also refer to the operating instructions of the connected components when playing them.

Selecting the input source

Press the input source select button

(NET/USB, iPod, DVD, BD, TUNER, DOCK, SAT/CBL, GAME, V.AUX, CD, TV) to be played back.

The desired input source can be selected directly.

• When iPod PLAY is pressed, the input source of this unit is switched to “DOCK” or “USB/iPod” and the connected iPod is automatically played (vpage 23 “iPod play function”).

You can also use the following operation to select an input source.

nnUsing the “Source Select” menuq Press SOURCE SELECT.

Display the “Source Select” menu.

Source Select

TUNER

SAT/CBL

CD

GAME

BD

V.AUX

DVD

DOCK

TV

The currently selected input source

 

[]:Source is highlighted. [ENT]:Select

w Use uio p to select the input source, then press ENTER.

The input source is set and the source selection menu is turned off.

When using with an iPod connected directly to the USB port of this unit, select “USB/iPod” for the input source.

Input sources that are not going to be used can be set ahead of time. Make this setting at “Source Delete” (vpage 57).

To turn off the source selection menu without selecting an input source, press SOURCE SELECT again.

nnUsing the knob on the main unitTurn SOURCE SELECT.

Turning SOURCE SELECT switches the input source, as shown below.

BD DVD TV SAT/CBL GAME

CD TUNER USB/iPod DOCK V.AUX

Adjusting the master volume

Use VOL df to adjust the volume.nn When the “Volume Display” setting (vpage 57) is “Relative”

GAdjustable rangeH

– – – –80.5dB – 18.0dB

nn When the “Volume Display” setting (vpage 57) is “Absolute”

GAdjustable rangeH 0.0 – 99.0

The variable range differs according to the input signal and channel level setting.

You can also operate via the main unit. In this case, perform the following

operations.

Turn MASTER VOLUME to adjust the volume.

Turning off the sound temporarily

Press MUTE.

The sound is reduced to the level set at “Mute Level” (vpage 57).

To cancel, press MUTE again. Muting can also be canceled by adjusting the master volume.

20