Denon AVR-890 Recording Components, Record Player, Digital Video Recorder, Video Cassette Recorder, assigned, Turntable, DVD Recorder, source is assigned

ENGLISH

Getting	Record Player
Started	Turntable

Connecting Devices not Equipped with HDMI terminals

Recording Components

	(MM cartridge)
Connections
Settings	(/%	"6%*0
		065
Playback	L	R

Digital Video Recorder

Select the terminal to use and connect the device.

For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 12.

DVD Recorder

	7*%&0			"6%*0			7*%&0		"6%*0
$0.10/&/5 7*%&0		7*%&0	015*$"-		"6%*0	7*%&0		"6%*0		015*$"-
065		065	065		065	*/		*/		*/
: 1# 13					- 3			- 3

Video Cassette Recorder

Select the terminal to use and connect the device.

For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 12.

Video cassette recorder

"6%*0		7*%&0		7*%&0			"6%*0
"6%*0	4 7*%&0		7*%&0		4 7*%&0	"6%*0
*/	*/		065		065	065
- 3						- 3

Zone-Multi
Control Remote
Information
Troubleshooting	• The AVR-890 is compatible with record players with an MM
	cartridge. When you connect to a record player with an MC
	cartridge, use a commercially available MC head amp or a step-
	up transformer.
	• When you increase the volume without connecting the record
	player, there may be “booming” noise from the speakers.
Specifications	NOTE
	The SIGNAL GND terminal of the AVR-890 is not a safety ground
	connection. Connect it to reduce noise when noise is excessive.
	Note that depending on the record player, connecting the ground
	line may have the reverse effect of increasing noise. In this case,
	it is not necessary to connect the ground line.

L	R	L	R	L	R	L	R
L	R	L	R	L	R	L	R

Set as necessary	Set as necessary
Set this to change the input signal to which the input source is	Set this to change the input signal to which the input
assigned.	source is assigned.
“Input Assign” (vpage 35)	“Input Assign” (vpage 35)

15

NOTE

•To record video signals through the AVR-890, use the same type of video cable for connection between the AVR-890 and the player as the cable used for connection between the AVR-890 and the recorder.

•Do not connect the output of the component connected to the AVR-890’s OPTICAL2 output connector to any input connector other than OPTICAL2.

•Digital signals are not output from the analog REC OUT connector.

NOTE

•To record video signals through the AVR-890, use the same type of video cable for connection between the AVR-890 and the player as the cable used for connection between the AVR- 890 and the recorder.

•Digital signals are not output from the analog REC OUT connector.