Denon AVR-890 LFE, OFF, NOTE, NOTE, Mode), OFF :, OFF :, OFF :, Medium, Small :, Large :, x MUSIC, Panorama, ON : Set, x CINEMA, ES DSCRT, DSCRT ON, Dimension, 0 ~ 6 (3)

ENGLISH

Getting
		Setting items					Setting contents
Started	LFE					–10dB ~ 0dB
	Adjust	the	low-frequency			For proper playback of the different program sources, we recommend
	effects level (LFE).
Connections						setting to the values below.
						• Dolby Digital sources : “0dB”
						• DTS movie sources :	“0dB”
						• DTS music sources :	“–10dB”
Settings	Center Image					0.0 ~ 1.0 (0.3)
	Assign center channel signal
	to front left and right channels
	for wider sound.
Playback
	Panorama					ON : Set.
	Assign front L/R signal also					OFF : Do not set.
	to surround		channels,		for
Multi	wider sound.
	Dimension					0 ~ 6 (3)
-
Zone	Shift	sound	image center
	to front or rear, to adjust
Remote	playback balance.
	Center Width					0 ~ 7 (3)
Control	Assign center channel signal
	for wider sound.
	to front left and right channels
Information	Delay Time					0ms ~ 300ms (30ms)
	Effect Level					1 ~ 15 (10)
	Adjust delay time to control
	sound stage size.
Troubleshooting	Adjust	the strength of			the	Set to a lower level if the positioning and sense of phase of the
	surround effect.
						surround signals seems unnatural.
	Room Size					Small : Simulate acoustics of a small room.
	Determine size			of acoustic		Medium small : Simulate acoustics of a medium-small room.
	environment.					Medium : Simulate acoustics of a medium room.
Specifications	NOTE					Medium large : Simulate acoustics of a medium-large room.
						Large : Simulate acoustics of a large room.
	“Room Size”			does	not
	indicate the size of the room
	in which sources are played.

	Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items	Setting contents
AFDM (Auto Flag Detect	ON : Set.
Mode)	OFF : Do not set.
Detectsthesource’ssurround
back channel signal and sets
the optimum surround mode
automatically.
Surround Back	nFor 2-channel sources
Sets the method of	ON : The surround back channel is used.
generating of the surround	OFF : No signal is played from the surround back channels.
back channel.	nFor multi channel sources
	Set this to set the method of generating of the surround back channel
	for sources that do not include surround back signals and when you
	do not want to play the surround back signals included in the source.
	Check the audio signals of the source being played before making this
	setting.
	OFF : No signal is played from the surround back channels.
	MTRX ON : Generate and play the surround back signals from the
	surround channel signals.
	PLgx CINEMAz1 : Generate and play the surround back signals by
	decoding the signals in the “Dolby Pro Logic gx Cinema” mode.
	PLgx MUSICz2 : Generate and play the surround back signals by
	decoding the signals in the “Dolby Pro Logic gx Music” mode.
	ES MTRX : Generate and play the surround back signals from the
	surround channel signals of the DTS source.
	ES DSCRTz3 : Play the surround back signals included in the 6.1-
	channel DTS source.
	DSCRT ONz3 : Play the surround back signals included in the 7.1-
	channel source.
	z1 : This can be selected when “S.Back” in the “Speaker Config.”
	settings (vpage 28) is set to “2sp”.
	z2 : This can be selected when “S.Back” in the “Speaker Config.”
	settings (vpage 28) is set to “2sp” or “1sp”.
	z3 : When “AFDM” is set to “ON”, the surround back channel is played
	with the AFDM function. When selected while “AFDM” is set to
	“OFF”, the source’s surround back signals are played.
	This can also be set by pressing	.
	NOTE

This is valid when the “Amp Assign” setting (vpage 27) is set to “7.1- channel surround back” or “6.1-channel surround back”, and when the “S.Back” setting (vpage 28) is set to “Large” or “Small”.

	Remote control
47		:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
	operation buttons		Cancel the menu