Denon AVR-890 Connections, Monitor (TV), n Copyright protection system (HDCP), n Connecting to a device equipped with a DVI-Dterminal, n Settings related to HDMI connections

ENGLISH

Getting	n Copyright protection system (HDCP)
	The AVR-890 supports HDCP (High-bandwidth Digital Contents
Started
	Protection). HDCP is a copyright protection technology for digital video
	signals. The devices connected to the AVR-890 must also support
Connections	HDCP.
	NOTE
	When a device that does not support HDCP is connected, video
	signals are not properly output.
Settings	Connections
	The AVR-890 allows connection of inputs from up to 5 HDMI
Playback	devices and output to 1 TV.
-Multi	DVD
Zone		)%.*
	Player	065
Remote	Blu-ray )%.*
	Disc Player	065

Connecting devices

NOTE

•If the menu “HDMI Audio Out” setting (vpage 30) is set to “Amp”, the sound may be interrupted when the monitor’s power is turned off.

•The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs.

n Connecting to a device equipped with a DVI-D terminal

When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D terminal.

NOTE

•No sound is output when connected to a device equipped with a DVI-D terminal. Also make the audio connections.

•Signals cannot be output to DVI-D devices that do not support HDCP.

•Depending on the combination of devices, the video signals may not be output.

Connecting Devices not Equipped with HDMI terminals

Monitor (TV)

•Select the terminal to use and connect the device.

•For video connections, see “Converting input video signals for output (Video Conversion Function)” (vpage 9).

For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 12.

Monitor (TV)

	"6%*0			7*%&0
015*$"-		7*%&0	4 7*%&0		$0.10/&/5 7*%&0
065		*/	*/		*/
					: 1# 13

Control	SAT/CABLE		)%.*
	Tuner		065
Information	Digital Video	)%.*
	Recorder		065
	Game	)%.*
	Console		065
Troubleshooting	Monitor	)%.*
	(TV)		*/
	• Use a cable on which the HDMI logo is indicated (a certified HDMI
Specifications	product) for connection to the HDMI connector. Normal playback
	may not be possible when using a cable other than one on which the
	HDMI logo is indicated (a non-HDMI-certified product).
	• When the AVR-890 is connected to other devices with HDMI cables,
	also connect the AVR-890 and TV using an HDMI cable.
	• When a device supporting Deep Color signal transfer is connected,
	use a cable compatible with HDMI ver.1.3a.
	• Video signals are not output if the input video signals do not match
	the monitor’s resolution. In this case, switch the Blu-ray Disc player /
	DVD player’s resolution to a resolution with which the monitor is
	compatible.

n Settings related to HDMI connections

Set as necessary. For details, see the respective reference pages.

Input Assign (vpage 35)

Set this when changing the input sources of the different terminals.

HDMI Setup (vpage 30)

Make these settings related to HDMI input/output signals.

• RGB Range

• Auto Lip Sync

• HDMI Audio Out

• HDMI Control

• Standby Source

• Power Off Control

NOTE

The audio signals output from the HDMI connectors are only the

HDMI input signals.

The component video connectors may be indicated differently on your monitor. For details, see the monitor’s operating instructions.

13