Denon AVR-890 Making the HDMI settings (HDMI Setup), Making the audio settings (Audio Setup), Amp, OFF, TV :, NOTE, ON :, NOTE, NOTE, Last, OFF :, OFF :, +15dB, Normal

Making the HDMI settings (HDMI Setup)

								Default settings are underlined.
Make settings for HDMI video/audio output.
	Setting items							Setting contents
RGB Range								Normal : Output with RGB video range (16 (black) to 235 (white)).
Set the video range of RGB								Enhanced : Output with RGB video range (0 (black) to 255 (white)).
output		from		the		HDMI		This setting is valid when using a TV equipped with a DVI terminal.
terminal.
Auto Lip Sync								ON : Compensated.
Automatic			compensation					OFF : Not compensated.
for timing shift in audio and
video output.
HDMI Audio Out								Amp : Use speakers connected to AVR-890 for audio playback.
Select HDMI			audio			output		TV : Use speakers of TV for audio playback.
device.								NOTE
								When the HDMI control function is operating, the setting of audio playback
								in the connected TV takes priority (vpage 52 “Controlling HDMI-
								compatible devices from the AVR-890 (HDMI Control Function)”).
HDMI Control								ON : Use the HDMI control function.
External		devices			can		be	OFF : Do not use the HDMI control function.
controlled from				the		AVR-		• Please consult the operating instructions for each connected device
890 and		the	AVR-890				can
								to check the settings.
be controlled			from		external
								• For details on the HDMI control function, see “Controlling HDMI-
devices.
								compatible devices from the AVR-890 (HDMI Control Function)”
NOTE								(vpage 52).
								NOTE
The		HDMI			control
								• When “Control” is set to “ON”, it consumes more standby power.
function				controls
								• When not using this unit for a long period, we recommend that you press
operations of a TV that
								to turn off (jOFF) the power.
is compatible				with		the
HDMI		control		function.				• When the “HDMI Control” setting has been changed, always turn off the
Make sure that the TV								power to the connecting devices afterwards and then turn back on.
and HDMI are connected								• The “HDMI Control” does not work when the power to the equipment is
when you perform HDMI								off.
control.								• When “HDMI Control” is set to “ON”, power is supplied constantly to the
								AC outlet (UNSWITCHED).

					ENGLISH
				Making detailed settings (Manual Setup)		Getting
	Setting items			Setting contents
Standby Source				Last : Standby with last used input source during power on.		Started
Set the HDMI connector for				HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set at
HDMI	signal input		during	the input source assigned to the respective.		Connections
standby.
to “ON”.
This can be set when
“HDMI Control”			is set
						Settings
Power Off Control				ON : Switched.
The power of the AVR-890				OFF : Not switched.
and external device turn off				• Please consult the operating instructions for each connected device
together.						Playback
				to check the settings.
This can be set when				• For details on the HDMI control function, see “Controlling HDMI-
“HDMI Control”			is set	compatible devices from the AVR-890 (HDMI Control Function)”		Zone-Multi
to “ON”.				(vpage 52).
						Remote
		Making the audio settings (Audio Setup)
				Default settings are underlined.		Control
Make settings for audio playback.
						Information
	Setting items			Setting contents
EXT.IN SW Level				+15dB : This is the recommended level.
Set the playback level of the +10dB / +5dB / 0dB : Select the level according to the player being used.
analog	subwoofer		signals
input from the external input						Troubleshooting
terminals (EXT. IN).
						Specifications

See overleaf

Remote control
	:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu	0
operation buttons		Cancel the menu