Denon AVR-890 Making the video settings (Video), DVD, HDP, DVR, DVD, HDP, VCR, DVD, VCR, DVD, HDP, VCR, DVR, DVD, HDP, VCR, DVR, AUTO, Full, OFF :, OFF :, AUTO:, Source

ENGLISH

Making the video settings (Video)

Default settings are underlined.

The items that can be set depend on the input source and the “Input Assign” setting.

Setting items

Setting contents

Video Select

Source : Play the picture and sound of the input source.

Switch

video

input

source

DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input

while

listening

to

audio

source to view. This can be set for individual input sources.

signal.

NOTE

• It is not possible to select HDMI input signals.

• When playing HDMI video input signals, the analog video signal of

another input source cannot be selected for the HDMI video output.

• Input sources for which “Delete” is selected at “Source Delete” (vpage

32) cannot be selected.

• Input sources for which “None” is selected at “Input Assign” (vpage

35) cannot be selected.

• This can also be set by pressing .

• To cancel, press

to select “Source”.

Video Convert

This can be set when the input source is

DVD

HDP

TV

SAT/CBL

The input

video signal

is

VCR

DVR

V.AUX

.

converted

automatically

in

ON : The input video signal is converted.

function of

the

connected

TV (vpage 9 “Converting

OFF : The input video signal is not converted.

Input

Video

Signals

for

Output

(Video

Conversion

• When a non-standard video signal from a game machine or some other

Function)”).

source is input, the video conversion function might not operate. In this

case set “Video Convert” to “OFF”.

• When “Video Convert” is set to “OFF”, the video conversion function

does not work. In this case, connect the AVR-890 and TV with the same

type of cable.

i/p Scaler

This can be set to the

DVD

HDP

TV

SAT/CBL

VCR

DVR

V.AUX

The input source’s resolution

input sources.

is converted to the resolution

OFF : Do not use i/p scaler function.

set at “Resolution”.

Analog : Analog signals are converted to HDMI signals.

Analog and HDMI : Both analog signals and HDMI signals are converted

to the desired HDMI resolution.

Resolution

This can be set when the input source is set to

DVD

HDP

TV

Set the output resolution.

SAT/CBL

VCR

DVR

V.AUX

, and when “i/p Scaler” is set to anything

Resolution A (Analog) : Analog

other than “OFF”.

Video

AUTO :

Detect monitor panel resolution and automatically set output

Resolution H (HDMI) : HDMI	resolution.
	480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Select the output
	resolution.

Making the input settings (Input Setup)

Setting items				Setting contents
Progressive Mode	This can be set when the input source is set to
						DVD	HDP	TV
Select optimum progressive
	SAT/CBL	VCR	DVR	V.AUX
					, and when “i/p Scaler” is set to anything
mode for video material.
	other than “OFF”.
	AUTO : The video material is automatically detected and the appropriate
	mode is set.
	Video1 : Select mode suitable for video playback.
	Video2 : Select mode suitable for video and 30-frame film material
	playback.
Aspect	This can be set when the input source is set to
						DVD	HDP	TV
Set the aspect ratio of the
	SAT/CBL	VCR	DVR	V.AUX
					, and when “i/p Scaler” is set to anything
video signal output from the
	other than “OFF”.
HDMI terminal.
	Normal : Output at 4:3 aspect ratio.

Full : Output at 16:9 aspect ratio.

Specifications Troubleshooting Information Control Remote Zone-Multi Playback Settings Connections Started Getting

Remote control						36
	:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
operation buttons		Cancel the menu