Denon AVR-890 Changing the Input Source’s Input Mode and, Decoding mode (Input Mode), DVD, DVR, Auto, Auto, Auto, Auto, Input, Input, PCM :, DTS :, Yes :, HDMI :, source

ENGLISH

Getting

Changing the Input Source’s Input Mode and

Started

Decoding mode (Input Mode)

Default settings are underlined.

Connections

The selectable input modes depend on the input source and “Input Assign” setting (vpage 35

“Changing the input sources assigned to the input terminals”).

Setting items

Setting contents

Settings

Input Mode

Auto : Automatically detect input signal and perform playback.

Set the audio input modes for

HDMI : Play only signals from HDMI input. (Excluding CD and SIRIUS)

the different input sources.

Digital : Play only signals from digital input.

Analog : Play only signals from analog input.

Playback

EXT. IN : Play only signals from EXT. IN input.

b Upon purchase, the settings of the different input sources are as shown

below.

-Multi

Input

DVD

HDP

TV

SAT/CBL

VCR

source

Zone

Default

Auto

HDMI

Digital

Auto

Analog

setting

Remote

source

DVR

V.AUX

CD

TUNER

Control

Input

Default

Auto

Auto

Analog

Analog

setting

Information

• The “HDMI” settings are made for input sources for which HDMI

input terminals are assigned at “Input Assign” (vpage 35).

input terminals are assigned at “Input Assign” (vpage 35).

• The “Digital” settings are made for input sources for which digital

Troubleshooting

• When a digital signal is properly input, the “

” indicator lights on

the display. If the “

” indicator does not light, check the digital

input connector assignment and the connections.

• The surround mode cannot be set if the input mode is set to “EXT.

IN”.

• This can also be set by pressing

.

Specifications

Each time you press the button, the input mode display will change.

Auto

HDMI

Digital

EXT. IN

Analog

	Making the input settings (Input Setup)
Setting items	Setting contents
Decode Mode	Auto : Detect type of digital input signal and decode and play
Set the input source’s	automatically.
decoding mode.	PCM : Decode and play only PCM input signals.
	DTS : Decode and play only DTS input signals.
	• This can be set for input sources for which “HDMI” or “Digital” is
	assigned at “Input Assign” (vpage 35).
	• Normally set this to “Auto”.

Changing the Input Source’s Display Name (Rename)

Default settings are underlined.

Use this procedure to change the display name of the currently selected input source.

Setting items			Setting contents
Rename	1. Use o p to set the cursor to the character you want to change.
Change the input source’s	2. Use ui to change the character, then press			.
display name to the desired	•	Up to 8 characters can be input.
name.	•	The input character type can be switched by pressing			while the
		display name is being changed.
	•	The types of characters that can be input are as shown below.
		GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
		GLower case charactersH abcdefghijklmnopqrstuvwxyz
		GSymbolsH	! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { } ˜
		GNumbersH	0123456789 (Space)
Default	Yes : Reset to the defaults.
The changed display names	No : Do not reset to the defaults.
are reset to the defaults.

	Remote control
37		:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
	operation buttons		Cancel the menu