ENGLISH

Connecting to an AV receiver with a digital audio input terminal

This connection is recommended when the specifications of an AV receiver connected to the unit are as follows:

Not supporting HDMI input

Supporting digital audio(coaxial) input

This connection enables faithfully playing a disc that supports 5.1-channel output.

Select the connector to use and connect the device.

Cables used for connections

Audio cable

Coaxial digital

cable

(Black)

 

 

(sold separately)

 

 

 

 

Audio and video cable

 

Audio and video

(White)

L

L

 

 

 

cable

(Red)

R

R

(supplied)

(Yellow)

 

 

 

Video cables

 

Component video

(Green)

 

 

 

 

 

cable

(Blue)

 

 

(sold separately)

(Red)

 

 

 

 

 

Connecting an AV receiver

AV receiver

 

 

AUDIO

 

 

COAXIAL

 

 

IN

 

 

 

L

L

VIDEO

R

R

 

 

VIDEO IN

 

 

COMPONENT

VIDEO IN

Y

PB

PR

When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, this unit outputs Dolby Digital or DTS bitstream from its digital audio output terminal.

NOTE

Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection.

When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection (vpage 4).

Super Audio CD’s DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear PCM is output.

Do not output DTS audio signals to an AV receiver that does not support DTS. Playing back a BD/DVD disc with recorded DTS content can generate noise and even damage your speakers.

10