Denon DBP-1611UD Adjusting the picture quality (Picture control), ENTER, ENTER, ENGLISH, Press PICTURE ADJUST, To finalize picture adjustments

Adjusting the picture quality (Picture control)

You can adjust the picture quality to your liking.

The adjusted values can be stored in Memory 1 through Memory 5.

Press PICTURE ADJUST.
1 The currently set status is displayed.
	Memory1
	3DNR
	BNR
	MNR
	Contract	0
	Brightness
	Gamma Correcti....

2 Press uito select a memory number to be used, and then press ENTER.

3 Press uito select an item then press ENTER or p.

4 Change the setting with ui.

• Refer to the table on the right for information on the different settings.

To finalize picture adjustments

Press PICTURE ADJUST after adjusting.

• The pop up menu of the picture adjustments is disappeared on the screen.

The picture adjustment settings are retained in memory even after the power is turned off.

			ENGLISH
				Simple
Setting items	Setting contents	Default
				version
Reduces noise in the entire picture.
3DNR	0 – +3	0
BNR
Reduces the block noise generated by digital	0 – +3	0
processing.
MNR				Basic
Reduces the noise around the outline of an object	0 – +3	0
generated by digital processing.				version
Contrast	–6 – +6	0
Adjusts picture contrast.
Brightness	0 – +12	0
Adjusts picture brightness.
Gamma Correction
Changes the amount of gamma correction to
adjust overall brightness of a picture.	–4 – +4	0
Make Dark(–) / bright(+)
section easier to see.
Sharpness				Advanced
Adjusts picture sharpness for the higher	–6 – +6	0
frequency range.
Hue (color tone)	–6 – +6	0
Adjusts the green and red color balance.				version
Adjusts the color density.
Chroma Level	–6 – +6	0
Setup Levelz	0 IRE	7.5 IRE
Adjusts the black areas of the image.	7.5 IRE

zEffective only for the 480i video signal from the video output terminal.

Information

23