Denon DBP-1611UD General Setting, System

ENGLISH

Settings for system, language, parental lock, network, etc. can be made.

Default settings are underlined.

Set the following settings.

•Screen saver settings

•Power saving mode settings

•HDMI control function settings

•Initialize settings

•Firmware update from the Internet

•BD-LIVE Memory switching settings

Setting items	Setting details

Screen Saver	On : The screensaver function activates when stop or pause status
Sets the screensaver.	continues for about three minutes.
	Off : Does not use the screensaver.
Auto Power Mode	On : This setting automatically sets the power to standby if any of the

Setting items	Setting details

Firmware Update	Check for Update : Checks if a newer version of firmware exists. Press
Updates the firmware of the	ENTER to see the approximate amount of time required for the update.
unit via the Internet.	If the firmware is already updated to the latest version, the firmware
	updating operation starts after you press ENTER.
	When the update starts, a progress bar and the remaining time required to
	complete the update are displayed on the television screen.
	When the update completes, the units turns on again and returns to the
	normal state.
Update Notification	On : The message for updating is displayed on a television screen.
Displays the message for	Off : The message for updating is not displayed on a television screen.
updating on a television
screen just after the power
is turned on.

This setting automatically	following states continues for approximately 30 minutes.
sets the power to standby.	• Disc not loaded
	• Playback stopped
	• Stopped due to the resume function
	Off : Does not use the auto power mode.
Power Saving	Power Saving Standby : This is the lowest power consumption mode.
Sets to power saving mode	During standby, operations are not accepted via HDMI control.
during standby.	Power indicator status in standby mode : Off
	Normal Standby : During standby, operations are accepted via HDMI
	control. Power consumption is slightly higher at this time.
	Power indicator status in standby mode : Red

BD Data Utility

Initializes the BD data stored in the built-in memory or external memory used for BD-Live.

BD Data Information : The BD data used for BD-Live are initialized. The space remaining in the memory being used is displayed.

FMT BD Data : Initializes the space for BD data being used for BD-Live.

This operation deletes all data. When a USB memory device that stores the data is inserted, never execute this operation.

BD-Live Memory : Built-in memory or external memory is selected for the BD-Live memory.

•Internal : The built-in memory is used.

•External : The USB memory device inserted in the unit is used.

If the file size used for BD-Live will exceed the remaining built-in

HDMI Control

Links the unit and a device connected with an HDMI cable that supports HDMI control.

On : Links with the device connected to HDMI.

Off : Disables the HDMI control function.

•For the HDMI control function to operate, it is necessary for the unit or HDMI-compatible TV connected to the unit to have an HDMI connection.

•Refer to “HDMI control functions” (vpage 21) for more information on HDMI control functions.

•After the “HDMI Control” setting has been changed, always turn off the power to the connected equipment and then turn it back on.

memory capacity, select “External” (vpage 15).

NOTE

When the following message is displayed after “Firmware Update” (vpage 34), follow the instructions in the message to perform operations.

“Disconnect the power plug of the unit from the outlet, wait approximately 30 seconds, and then insert the plug again before use.”

HDMI Power Off Control	On : Turns the unit’s power to standby through linkage to the TV.
Links the power of the unit	Off : Does not turn the unit’s power to standby through linkage to the TV.
and a device connected with
an HDMI cable that supports
HDMI control.
Initialize	Cancel : Does not initialize.
All settings including audio	OK : Executes initialization.
mode and picture quality are
set to default settings.