ENGLISH
| Video Setting |
3D | Default settings are underlined. |
Sets up 3D video software playback. |
|
|
|
Setting items | Setting details |
Audio Setting
Settings for audio output are made.
Audio Output | Default settings are underlined. |
Set the audio output. |
|
3D Output Setting Sets up video outputs for 3D video playback (only for HDMI).
Auto : Automatically determines whether the video software is 3D or 2D and plays it back.
•When you play 3D video, 3D and 2D video parts are played back as 3D and 2D, respectively.
•Normally, use this setting.
Off : Always outputs 2D video signals.
Setting items | Setting details |
|
|
Coaxial | Bitstream : For selecting if the device connected to the unit supports |
For selecting the format | Dolby Digital or DTS Digital Surround. |
output from the digital audio | PCM : For selecting when the device connected to the unit does not |
output terminals. | support Dolby Digital or DTS Digital Surround. |
TV Screen Size Setting | Use uio p or 0 – 9 to enter three digits for the screen size of your TV in |
Sets up the screen size of | the setting screen, and press ENTER for confirmation. |
your 3D enabled TV. | • The default setting is “046” (46’ TV screen size). |
| NOTE |
| Set up the correct size, otherwise you may not be able to view 3D video |
| properly. |
3D video playback operations may differ according to the disc to be used. Refer to the instruction manual supplied with your disc.
NOTE
When passing 3D video signals output from this device through an AV receiver to a 3D enabled TV, the AV receiver must also be compatible with inputting / outputting 3D video signals.
To view 3D video, use a 3D enabled TV.
•To connect the unit with a 3D enabled TV, use a high speed HDMI cable.
•During 3D playback, you cannot adjust “Video Resolution” (vpage 22), “HDMI output Settings” (vpage 22), or “Adjusting the picture quality” (vpage 23).
| Off : For outputting no audio signal from the digital audio output terminal | |||||
| of the unit. | |||||
| For converting audio signals, see “About digital signal audio output” | |||||
| (vpage 49). | |||||
HDMI | Bitstream : For selecting when the device connected to the unit supports | |||||
For selecting the format | Dolby TrueHD/Dolby Digital Plus/Dolby Digital or | |||||
output from the HDMI | Surround. The output format is automatically selected according to the | |||||
output terminals. | audio format or the number of channels supported by the connected | |||||
| HDMI device. | |||||
| PCM : For selecting when a device connected to the unit does not support | |||||
| Dolby TrueHD/Dolby Digital Plus/Dolby Digital or | |||||
| Surround. | |||||
| Off : For outputting no audio signal from the HDMI output terminal of the | |||||
| unit. | |||||
| For converting audio signals, see “About digital signal audio output” | |||||
| (vpage 49). | |||||
| NOTE |
|
|
|
| |
|
| |||||
|
| |||||
| If “BD audio mode” is set to “HD Audio Output” | |||||
| with MODE on the remote control, BD secondary | |||||
| audio and interactive audio are not output. |
|
| |||
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
38 | Remote control operation | Displaying the menu | Move the cursor | Decision the setting | Return to previous menu |
| buttons | Cancel the menu | (Up/Down/Left/Right) | ||
|
|
|