Troubleshooting
If a problem should arise, first check the following:
1.Are the connections correct?
2.Is the set being operated as described in the owner’s manual?
3.Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
If the symptom is not covered on the check list, contact your dealer or service centers. Service centers are listed at
GGeneralH
Symptom | Cause/Solution | Page |
Power does not turn | • Check whether the power plug is correctly inserted into the power | C 5 |
on. | outlet. |
|
Display is off. | • Set “Dimmer” on the menu to something other than “OFF”. | 74 |
|
|
|
The power indicator | • The temperature inside the unit has risen. Please turn off power | – |
is blinking red | once, and |
|
in intervals of | sufficiently. |
|
approximately 2 | • Please | – |
seconds. |
|
|
After turning on the | • The unit’s | – |
power, the power | please contact the D&M Professional service adviser. |
|
indicator is blinking |
|
|
red in intervals of |
|
|
approximately 0.5 |
|
|
seconds. |
|
|
Set does not operate | • Reset the microprocessor. | 128 |
properly. |
|
|
GHDMIH
Symptom |
| Cause/Solution | Page |
No audio is |
| • Check the connection of the HDMI connectors. | 8 |
output with HDMI | • When outputting HDMI audio from the speakers, set “HDMI | 68 | |
connection. |
| Audio Out” on the menu to “AMP”. |
|
|
| • When outputting HDMI audio from a TV, set “HDMI Audio Out” | 68 |
|
| on the menu to “TV”. |
|
No video is |
| • Check the connection of the HDMI connectors. | 8 |
output with HDMI | • Set the input source to match the connected HDMI connector. | 8, 19 | |
connection. |
| • Check whether the TV is compatible with copyright protection | 7 |
|
| (HDCP). If connected to a device not compatible with HDCP, video |
|
|
| will not be output correctly. |
|
When the following | • Set “HDMI Control” in the menu to “OFF”. | 46, 68 | |
operations are |
| Furthermore, if you do not want to link the power off operation |
|
performed on |
| with devices compatible with HDMI control, set “P.Off Control” |
|
devices compatible | in the menu to “OFF”. |
| |
with HDMI control, |
|
| |
the same operations |
|
| |
occur on this unit. |
|
| |
• Power ON/OFF |
|
| |
• Switching | audio |
|
|
output devices |
|
| |
• Adjust volume |
|
|
|
• Switch input source |
|
| |
GVideoH |
|
|
|
Symptom |
| Cause/Solution | Page |
No picture appears. | • Check the TV connection. | C 3 | |
|
| • Set the TV input correctly. | C 3 |
version Basic
version Advanced
Information
BD | 125 |