Playback (Basic operation)

Settings (vpage 18)

nn Selecting the input source (vpage 19) nn Adjusting the master volume (vpage 20)

nn Turning off the sound temporarily (vpage 20)

nn Playing a Blu-ray Disc player/DVD player (vpage 20)

nn Playing a CD player (vpage 20) nn Playing an iPod (vpage 21)

nn Playing network audio (vpage 25)

nn Playing a USB memory device (vpage 30)

Selecting a listening mode (Surround mode) (vpage 33)

Playback (Advanced operation) (vpage 46)

Important information

Before starting playback, make the connections between the different devices and the settings on the unit.

NOTE

Also refer to the operating instructions of the connected devices when playing them.

Selecting the input source

Press the input source select button

(BD, SAT/CBL, TV, NET/USB, DVD, V.AUX, DOCK, GAME1, GAME2 or CD) to be played back.

The desired input source can be selected directly.

You can also use the following operation to select an input source.

nnUsing the knob on the main unit

Turn SOURCE SELECT.

•Turning SOURCE SELECT switches the input source, as shown below.

SAT/CBL GAME1 GAME2 V.AUX DOCK

TV DVD BD CD NET/USB

•When iPod 1on the main unit is pressed, the input source of this unit is switched to “DOCK” or “NET/USB” and the connected iPod is automatically played (vpage 24 “iPod play function”).

nnUsing the “Source Select” menu

Switch the remote control unit to the J(MAIN ZONE) mode when performing this operation (vpage 82 “Operating AV devices”).

If the remote control unit is in K (ZONE2) mode, the “Source Select” menu will not be displayed when SOURCE SELECT is

pressed.

Source Select

The currently selected input

source is highlighted.

 

 

 

Player

 

Video

Network

BD

 

SAT/CBL

Favorites

DVD

 

TV

Media Server

CD

 

GAME1

 

DOCK

 

GAME2

 

USB/iPod

V.AUX

 

 

 

 

[

] Move

[ENTER] Enter

q Press SOURCE SELECT.

Display the “Source Select” menu.

w Use uio p to select the input source, then press ENTER.

The input source is set and the source selection menu is turned off.

version Basic

version Advanced

Information

•When using with an iPod connected directly to the USB port of this unit, select “USB/iPod” for the input source.

•Input sources that are not going to be used can be set ahead of time. Make this setting at “Source Delete” (vpage 73).

•To turn off the source selection menu without selecting an input source, press SOURCE SELECT again.

•When SOURCE SELECT is pressed, the AMP-operation mode starts automatically (vpage 82).

BD

19