Connecting to a network (LAN)
•This unit lets you play via your network (LAN) music files stored on a computer.
You can also operate this unit from a computer using the Web control function.
•You can update by downloading the latest firmware from the D&M Professional website.
For more information, on the menu, select “Firmware Update” (vpage 75).
•See “Network Setup” on the menu (vpage 70) for more information on network setting.
Cables used for connections
Cable (sold separately)
Required system
nnBroadband internet connection nnModem
Device that connects to the broadband circuit and conducts communications on the Internet.
A type that is integrated with a router is also available.
nnRouter
When using this unit, we recommend you use a router equipped with the following functions:
• |
NOTE
• A contract with an ISP is required to connect to the Internet. |
No additional contract is needed if you already have a broadband |
connection to the Internet. |
• The types of routers that can be used depend on the ISP. Contact an |
ISP or a computer shop for details. |
• D&M assumes no responsibility whatsoever for any communication |
errors or troubles resulting from customer’s network environment or |
connected devices. |
• This unit is not compatible with PPPoE. A |
is required if you have a contract for a type of line set by PPPoE. |
• Do not connect an ETHERNET connector directly to the LAN port/ |
Ethernet connector on your computer. |
version Basic
Advanced
Ethernet cable
Modem Internet 
Computer
This function automatically assigns IP addresses on the LAN. |
• |
When connecting multiple devices, we recommend a switching |
hub with a speed of 100 Mbps or greater. |
nnEthernet cable
• Use only a shielded STP or ScTP LAN cable which is available at |
retailer. |
• Some flat type Ethernet cables are easily affected by noise. |
We recommend using a normal type cable. |
• To listen to audio streaming, use a router that supports audio |
streaming. |
version
|
|
| To WAN side |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| To LAN port |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| LAN port/ | |||||||||
|
|
| To LAN port |
|
| |||||||||
|
|
| ||||||||||||
|
|
| ||||||||||||
|
|
|
|
| Ethernet | |||||||||
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
| connector | |||||||
Router
• If you have an Internet provider contract for a line on which network |
settings are made manually, make the settings at “Network Setup” |
(vpage 70). |
• With this unit, it is possible to use the DHCP and Auto IP functions |
to make the network settings automatically. |
• When using this unit with the broadband router’s DHCP function |
enabled, this unit automatically performs the IP address setting and |
other settings. |
When using this unit connected to a network with no DHCP |
function, make the settings for the IP address, etc., at “Network |
Setup” (vpage 70). |
• When setting manually, check the setting contents with the network |
administrator. |
Information
For connections to the Internet, contact an ISP (Internet
Service Provider) or a computer shop.
BD | 15 |