Audio Setup

Default settings are underlined.

 

 

 

Make settings for audio playback.

 

 

 

Setting items

Setting details

 

System Setup

 

 

Setting items

Setting details

 

 

2ch Direct/Stereo

Distance FL / Distance FR : Select the speaker.

(Continued)

• 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.6m) : Set the distance to the

 

speaker.

 

Set the difference in the distance between the speakers to less than

version Basic

2ch Direct/Stereo Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.

Setting : Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.

•Basic : The settings at “Speaker Setup” (vpage 65) are applied.

•Custom : Make separate settings for 2-channel. Make the following settings:

Front : Set the front speaker size.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

If “Speaker Config.” – “Subwoofer” (vpage 65) is set to “No”, the setting is automatically set to “Large”.

SW : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

If “Speaker Config.” – “Subwoofer” (vpage 65) is set to “No”, the setting is automatically set to “No”. If the “Front” setting is “Small”, the setting is automatically “Yes”.

SW Mode : Select low range signals to be reproduced by subwoofer.

•LFE : When the “2ch Direct/Stereo” – “Front” setting is set to “Large”, the LFE signal alone is output from the subwoofer. Also, when the “2ch

Direct/Stereo” – “Front” setting is set to “Small”, the front channel low range signal is added to the LFE signal output from the subwoofer.

•LFE+Main : The front channel low range signal is added to the LFE signal output from the subwoofer.

This setting can be set made “2ch Direct/Stereo” – “SW” is set to “Yes”.

Crossover : Set the maximum frequency of the bass signal output from each channel to the subwoofer.

•40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz

•This setting can be set made “2ch Direct/Stereo” – “SW” is set to

“Yes”.

•If the “2ch Direct/Stereo” – “Front” setting is “Large” and the “SW

Mode” setting is “LFE”, “Full Band” is displayed and the setting cannot be made.

 

20.0 ft (6.00 m).

 

Level FL / Level FR : Select the speaker.

 

• –12.0dB – +12.0dB (0.0dB) : Adjust the level of each channel.

Auto Surround

ON : Memorize settings. Automatically play with the last used surround

Make setting for

mode.

memorizing surround mode

OFF : Do not memorize settings. Surround mode does not change

setting for each input signal

according to input signal.

type.

 

• The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals r LPCM Multi-channel signals

• When playing in PURE DIRECT, the surround mode does not change even if the input signal is changed.

version Advanced

Information

BD

69