13The screen shown below is displayed, and registration of the preset code is completed.
RemoteSetupGuide
Remote Setup Guide is finished.
Press [AMP] button. And press [ENTER] button to return MENU.
OK
•The menu screen is retrieved. Press AMP then ENTER.
14Either of the screens below is displayed.
q
RemoteSetupGuide
Selected code is not matched
Please try other codes.
•The screen is displayed for 3 seconds, then the next preset registration screen is displayed automatically.
BD
Registering preset codes
w
RemoteSetupGuide
Sorry, your remote is not supported. This function can not be used for your device.
Press [AMP] button. And press [ENTER] button to return MENU.
O K
GIf screen q is displayedH
The device may be operating with the preset code displayed next. The preset registration screen is displayed. Repeat steps 9 to 12.
GIf screen w is displayedH
The device cannot be controlled with the remote control unit supplied
with this unit. Use the remote control unit supplied with the device to be used. The menu screen is retrieved. Press AMP then ENTER.
Some manufacturers use more than one type of remote control code. Preset codes to change the number and verify correct operation.
NOTE
Depending on the model and year of manufacture of your device, some buttons may not operate.
85
version Basic
version Advanced
Information