Precautions When Loading Discs
ENGLISH
6PART NAMES AND FUNCTIONS
•Only load one disc. Loading two or more discs in a layer will cause breakdown and may also scratch the discs.
•Discs of the 8 cm size should be carefully aligned with the recessed disc guide area and loaded without the use of an adapter. If not properly loaded, the disc may fall out or the disc holder may cease to open.
•Be careful not to get your finger caught when the disc holder is closing.
•Do not place anything other than a disc on the disc tray.
•Do not use discs that are cracked, misshapen, or have been repaired with an adhesive, etc.
•Do not use discs that have adhesive coming out from cellophane tape or the label of a rental disc, or adhesive remaining after removal of the label. Use of a disc in this condition may result in the disc not being ejected or in breakdown.
Front Panel
qPower button (POWER)
• Turns the CD recorder ON and OFF.
wPhones jack (PHONES)
• Jack for headphones.
ePhones level control (PHONES LEVEL)
• Adjust the headphone volume.
!3 Menu button (MENU)
•This button is used when inputting disc and track titles and for such editing operations as
!4 Multi Jog dial (MULTI JOG)
•Recording level control (Recording).
•Selects settings (Menu mode).
!5 Record button (4 REC)
5RESTRICTIONS RELATED TO THE CD-R/RW STANDARDS
★Standards concerned with CD recorder playback have been established based on the existing standards of CD players; however, for recording, the method differs from that used with existing cassette decks and MD recorders, etc. In view of this, please gain a good understanding of the following restrictions associated with
Restrictions of CD-R/RW Discs
•
•The recorded information of
•Recording mistakes made with
Restrictions in Recording with this Unit
•The recording operation procedure is the same for
•When making additional recording to a previously recorded disc, the end of the last track is detected and recording is started from there.
•The record standby mode cannot be set for
•Songs with a recording time of less than 4 seconds cannot be recorded.
• A maximum of 99 tracks can be recorded to one
•It is not possible to conduct digital input recording from digitally recorded
•This unit cannot record
•When a recording is made from a disc that includes data other than audio signals such as CD graphics, only the audio signal is recorded; other data is not recorded.
•DVD (Dolby Digital, DTS, and other compressed audio signals) cannot be recorded.
Compatibility with Other CD Players and Discs
• | Finalization processing on a |
| player. (See “Finalizing |
• | Finalization processing on a |
rRemote control sensor (REMOTE SENSOR)
• Receives signals from the remote control.
tDisc tray (CD)
•
yDisplay select button (DISPLAY SELECT)
• The display switches each time the button is pressed.
Time display
1 for both the 1 CD only 1
CD and
uTitle/Character button (TITLE/CHARACTER)
•When pressed while the display mode is set to CD or
•When text is being input, the characters change.
iInput button (INPUT)
•Selects input source.
•Switching will be as follows each time the button is pressed.
| 1 CD |
|
| OPT |
|
|
| COAX |
|
| |
|
| 1 (OPTICAL) |
| 1 (COAXIAL) |
|
|
| ||||
|
|
| ANALOG |
|
|
| ANALOG |
|
| ||
|
|
|
| XLR | 1 |
|
| 1 |
| ||
|
|
|
|
|
| ||||||
|
|
| (BALANCED) |
|
|
| (UNBALANCED) |
|
| ||
✽Switching is not permitted during recording.
oCD unit operating buttons
1: Use this to start playback.
2 : Use this to stop playback.
3 : Use this to pause playback.
8, 9 : Use this to move to the beginning of tracks.
5: Use this to open and close the disc holder. TIME : Use this to switch between the elapsed time, remaining track time and total
remaining time.
!0 Relay mode button (RELAY MODE)
•The mode switches each time the button is pressed.
•Press this button to record.
•The recording standby mode is set when the record button (4 REC) is pressed alone.
•Press the play button (1 PLAY) while in the recording standby mode to start recording.
•To stop recording or to cancel the recording standby mode, press the stop button (2 STOP).
!6 Disc tray (CD-R)
!7 CD-R operating buttons
1: Use this to start playback or recording.
2 : Use this to stop playback or recording.
3 : Use this to pause playback or recording.
8, 9 : Use this to move to the beginning of tracks.
5: Use this to open and close the disc holder.
✽If the text information input operation has performed but not finalized, the disc holder cannot be opened until all the test
information has been deleted. (See Page 10.)
TIME : During playback, use this to switch between the elapsed time, remaining track time and total remaining time. During recording, use this to switch between the elapsed time per track and the total remaining recording time.
!8 Normal speed copy mode button
(DUBBING NORMAL)
•The copy dubbing mode switches each time this button is pressed.
Disc | Make CD | Scan record | ||
1 dubbing | 1 dubbing | 1 dubbing | 1 dubbing |
|
|
|
|
|
|
!9
(DUBBING HIGH)
•The
Disc | Make CD | Scan record | ||
1 dubbing | 1 dubbing | 1 dubbing | 1 dubbing |
|
|
|
|
|
|
designed to be used with |
NOTES:
•To assure accurate recording, record with an ambient temperature of 30 °C or less.
•Do not obstruct the ventilation holes on the top.
•Recording may stop if the unit is subject to shocks during recording. If recording stops, it may no longer be possible to use the disc normally.
Normal | Relay | Mix | Dual |
| @0 Display |
1 (SINGLE) | 1 (RELAY) | 1 (MIX) | 1 (DUAL) |
| • Information screen. |
|
|
|
|
|
|
!1 Finalize button (FINALIZE)
• Press this button to finalize.
!2 Clear button (CLEAR)
•Use this to delete programmed tracks or text input characters.
•When pressed in the menu mode, the set returns to the previous mode.
7
