5BASIC OPERATION
Play and pause•Each push of the !0 PLAY/PAUSE (13) button switches between playback and pause. !0 PLAY/PAUSE (13) button illuminates solid green during playback and flashed in pause.
•When the !0PLAY/PAUSE (13) button is pushed during play, the
•Playback will pause when SCRATCH(MAIN) is selected with the @7DISC MODE button and the scratch disc is held with your hand. Playback resumes when your hand is released.
Play and Cue•When the !1CUE button is pushed during playback, the track stops and returns to the original position of which playback started from, the (Cue point). This function is also called
•You can set and change Cue point as follows.
•When you started playback.
•Track select finished.
•manual search.
Select the track•Turn the #2TRACK knob.
•By pushing #2TRACK knob down while turning, the tracks will increment 10 at a time.
•If you would like to start playback other from the beginning of the track, you need to move Cue Point using fast Search, scan and manual search function.
You can move to the approximate playback start position by #3or #4FAST SEARCH buttons.
[Quick Jump]
| • If the FAST SEARCH button | |
| is tapped shortly, the | |
1 | playback position jumps about 10 seconds. | |
The jump time can be selected in the | ||
| ||
| preset mode from 10,20,30 or 60 sec. |
[FAST SEARCH]
•When the FAST SEARCH button is pressed and held in, the disc is
Push the @7DISC MODE button for more than 1 sec to set !2Scratch Disc to
2 search mode. The DISC MODE button LEDs will turn off.
FAST SEARCH
When !2Scratch Disc is pressed in the play, pause, Cue or frame repeat mode, it works as the fast search function. Forward fast search starts when the disc vicinity of the 1 mark is pressed. The speed of forward fast search can be selected by pressing the disc at fast search different positions 7, 71 and 77.
Reverse fast search starts when the disc vicinty of the 0 mark is pressed. The speed
3of reverse fast search can be selected by pressing the disc at different positions 6,
60 and 66.
Manual Search
When !2Scratch Disc is turned in the pause, Cue or frame repeat mode, it works as the manual search function.
Turn the !2Scratch Disc to change Cue point. You can hear the short sound of the current Cue point.
★1 Manual search allows you to move the CUE point
around by one frame at a
3 time (1/75 second) with an audible
After you found your preferred Cue point, push
4 the !1CUE button then a new Cue point is set.
Adjusting the pitch•With Pitch slider you can adjust the playback speed (Pitch).
•If you would not prefer to change key of sound, use the Key Adjust function.
Push the #8 
PITCH/KEY button to PITCH LED lights up.
1
• PITCH → KEY (key adjust) → OFF
Pitch decreases
Move the #7Pitch Slider to adjust
2the pitch. The current pitch setting is displayed on the display.
Pitch increases
4%, 10%, 16%, 24%, 50% and 
100%. When the #8 
RANGE
button is pushed for more than 1 sec, the pitch range can be selected with the #2 PARAMETERS knob.
3• When the #2PARAMETERS
knob is pushed the pitch range is entered and the pitch range selection mode is cancelled.
ENGLISH
Pitch Bend•With PITCH BEND function you can change pitch temporary.
[PITCH BEND +/– buttons]
• Push the #5PITCH BEND
– or #6+ button for momentary change of pitch.
1While holding these buttons down, the pitch continues to change up to the limitation.
•After releasing the PITCH BEND buttons, playback pitch returns to slider setting.
[Scratch Disc]
•When the disc mode is set to SEARCH/BEND with the @7DISC MODE button, the playback speed can be
2changed by turning !2 Scratch Disc during playback.
•When !2 Scratch Disc pressed, it works as the fast search function.
Power on play•When “POWER ON PLAY” is set to “ON” at ⁄5 PRESET “(10) Power Play”, playback starts from the first track on the disc when the power is turned on.
11