15PRESET

1.Preset mode

q The preset mode is available when @5PRESET button is pushed for more than 1 sec while DN-D6000 is in Cue, pause or no disc mode.

w Turn the #2PARAMETERS knob to select the preset item.

e After selecting an item, push the #2PARAMETERS knob to select the preset data. r To change other Preset items, repeat these steps.

t Push the @5PRESET, !1CUE or !0PLAY / PAUSE (13) button to exit from the Preset mode.

2.Preset items and data

The “*” mark next to the data indicates the default value.

(1)Auto Cue : Auto Cue level search on/off. (A Cue ON* / A Cue OFF)

(2)Next Track : Cross_OFF / Cross1sec / Cross2sec* / Cross3sec

Select the time for fading out the currently playing track when playback of a new track is started with the next track function. This time is used also for the overlap playback time of RELAY PLAY.

(3)S-Stroke (SCRATCH STROKE) : Short*/Long

Allows you to select a comfortable stroke distance for scratching “Long” is set for wide pattern strokes and “Short” is set for small pattern strokes.

(4)Scratch : Delay_OFF* / Delay -1- / Delay -2- / Delay -3-

Select the time after which the normal play or pause mode is set after scratch play stops.

(5)Jump Time : Jump10sec* / Jump20sec / Jump30sec / Jump1min Select the jump time of QuickJump.

(6)P. Range (PITCH RANGE) : 4% Range / 10% Range* / 16% Range / 24% Range Select the playing pitch range when the power is turned on.

(7)EOM Time :

EOM OFF / EOM 10 sec* / EOM 15 sec / EOM 20 sec / EOM 30sec / EOM 60 sec / EOM 90 sec Track end message start time.

(8)Total Time : Total ON / Total OFF* Total time display on / off.

(9)Fader Mode (FADER START MODE) : Play / Cue* / Play / Pause Select 2-line type (Cue and Play) or 1 line type (Play and Pause).

(10)Power Play (POWER ON PLAY) : Play ON / P. Play OFF* Playback starts when the power is turned on if a disc is loaded.

(11)Pitch : Pitch ON* / Key adjON (KEY ADJUST ON) / Pitch OFF Select the pitch mode when the power is turned on.

(12)Play Mode (SINGLE / CONTINUOUS / SINGLE PLAY LOCK) : Single / Cont. / Play Lock* Select the play mode when the power is turned on.

(13)Time Mode (ELAPSED / REMAIN) : Elapsed* / Remain Select the time mode when the power is turned on.

(14)Relay Mode : Relay ON / Relay OFF* : Relay mode on / off.

If RELAY MODE is selected by PRESET of CD1 and CD2, RELAY MODE will be selected when the power is turned on.

ENGLISH

(15)Memo Clear (MEMO ALL CLEAR) :

Clear all MEMO data in the non-volatile memory.

q To clear all MEMO data, push the PARAMETERS .

• “Clear OK?” flashes on the character display.

wPush the PARAMETERS knob again and select “OK” to execute clearing all MEMO data.

• “Memo Clear” is displayed on the character display while clearing.

eOnce clearing is completed, “Complete!” is displayed.

(16)Version No. The DN-D6000’s software version is displayed. (SYSTEM / DSP)

(17)Preset Int.(PRESET INITIALIZE) : Set all the preset data back to the factory defaults. q To clear the PRESET data, push the PARAMETERS knob.

“Initial OK?” flashes on the character display.

w Push the PARAMETERS knob again and select “OK” to start clear the preset data. “Preset Int” is displayed on the character display while data clearing.

eOnce clearing is completed, “Complete!” is displayed.

21