ENGLISH

8SEAMLESS LOOP/HOT START/STUTTER

Seamless Loop/Hot Start/Stutter (A1, A2 buttons)

q, w, y r

t, y e, y

Exit/Reloop

r In Seamless Loop playback, you can force exit from or return to the loop.

EXIT:

While the Seamless Loop playback, push

5the EXIT/RELOOP button to exit from loop. DN-D6000 continues playback after the B point.

RELOOP:

When the EXIT/RELOOP button is pushed after exit the loop, Seamless Loop playback resumes from the A point.

Stutter

•A1 and A2 points can be also used for Stutter playback.

Operation display (refer to the section describing the display)

Setting the A point (loading the Hot Start data)

qPush the A1 or A2 button to

set the A point and Hot Start data loading starts.

• A1 and A2 buttons can be

1 used separately for each Hot Start.

•When an A point is set, the corresponding A button and “ ”

display light and that button is set to the Hot Start mode.

•The BPM is set independently for each Hot Start automatically.

 

Starts Hot Start

2

w When A1 or A2 button is

pushed, Hot Start playback

 

starts from the

 

corresponding A point.

 

 

 

Setting the B point for Seamless Loop

eWhen the B button is pushed after setting the A

3-1

point or after starting Hot

 

start playback, the B point is

 

set and Seamless Loop

 

playback starts from the A

 

point.

•The B button works with respect to the A point operated before the B button

3-1was pushed.

•If the B button is pushed during Seamless Loop playback or after EXIT

playback, the B point moves to the point at which the button was pushed.

3-2• When the B point is set, the B and “ ” displays light.

Playing Seamless Loops

•When the B point for A1 is detected after playback started from A1 point, playback returns to A1 point with

seamless. While A1 to B looping, B point for A2 ignored.

4• When the B point for A2 is detected after playback started from A2 point,

playback returns to A2 point with seamless. While A2 to B looping, B point for A1 ignored.

 

t To enable stutter playback,

 

 

 

 

6

push FLIP button for A1/A2

buttons, then “ ” display

 

 

turns off.

 

Press the FLIP button to switch between

 

the Hot Start/Seamless Loop and Stutter

 

modes.

Clear the A1/A2 point

yWhile pressing the FLIP/(CLR) button, push the A1 or A2 button to clear the corresponding A and B points.

Or push the FLIP button for more than 1 sec to clear both A1 and A2 points at once.

Quickly pressing the “FLIP” button first

7 and then A1 , A2 or B buttons will clear these points individually.

14