Denon DN-M991R operating instructions InitialError, English, 2Presetting Procedure

ENGLISH

(2)Presetting Procedure

•Functions can be preset using the buttons on the front panel.

•The presettings can also be set using serial remote signals (RS232C/RS422A).

•Presettings can be made when no cartridge is loaded or when in the stop, standby, pause, recording pause or recording monitor mode.

Enter the preset mode.

Press the STANDBY/CUE button while pressing the

MODE button.

1 Character display

Select the preset item.

Turn the select knob.

Character display

	Turn the knob
2	clockwise to move in
	the direction of the
	arrows,
	counterclockwise to
	move in the opposite
	direction.
	NOTE: The first preset item displayed is the last preset
	item displayed the last time the presettings were
	made.
	Change the preset values.
	Press the select knob.
	The character display changes as
	shown below.
3-1	Before change	After change
		Flashing

Playback speed select.

Turn the select knob to select the pitch.

Flashing

3-2

Press the select knob to set the pitch.

Lit

Exit the preset mode.

Press the MODE button.

MODE

4

The preset mode is canceled and the set returns to the previous mode.

To set the presettings back to the initial settings (the settings set upon shipment from the factory).

Turn the power on while holding in both the SEARCH 7 and the SEARCH 6 buttons. For the initial settings, refer to “(1) List of preset functions”.

5

The character display changes as shown below.

NOTE:

If the message shown below appears, there is a problem with the preset memory. Contact a serviceperson.

InitialError

NOTE:

The playback speed is the most recently set playback speed. For example, if the pitch is set with the presettings then set from the keyboard, the pitch set from the keyboard is used.

14