ENGLISH
(6)Starting to Record
1Load the cartridge.
Set the presettings according to the purpose.
2(Refer to Page 13.)
NOTE: Steps 1 and 2 can also be performed in the reverse order.
Set the recording pause mode. Press the REC button.
Flashing (orange) | Lit |
3
For a disc on which 3 tracks are already recorded.
The disc’s total number of tracks and playing time are displayed.
NOTE: If the REC button is pressed in the stop mode, the recording monitor mode is set. (Only the REC button lights.)
Start recording.
Press the PLAY/PAUSE button.
4 |
| Lit (green) | Lit | |
|
|
|
| |
| Recording starts and the |
| indicator lights. |
|
| TOC |
| ||
NOTE: If the DIGITAL IN indicator is flashing, the digital signal is unlocked. If this is the case, recording is not possible.
To change the track number during recording:
Press the REC button.
5
The track number is incremented and recording continues.
To pause recording:
Press the PLAY/PAUSE button.
6 | Flashing (orange) | Lit |
|
|
Recording stops and the recording pause mode is set.
To resume recording, press the PLAY/PAUSE button again. The track number is incremented and recording resumes.
(7) Stopping Recording
Use one of the following methods to stop recording.
Lit once in standby
1
Recording stops, the UTOC is written and the standby mode is set.
The TOC indicator flashes while the UTOC is being
written.
20
