Denon DN-M991R operating instructions Basic Operation, English, Starting Playback, End Monitor

Models: DN-M991R

1 41
Download 41 pages 41.85 Kb
Page 18
Image 18
5 BASIC OPERATION

ENGLISH

5 BASIC OPERATION

(1)

Starting Playback

 

 

 

 

1

Load the cartridge.

 

 

 

Make the presettings according to the usage purpose.

2

(See Page 13.)

NOTE: Steps 1, 2 and 3 can be performed in the opposite

 

 

order.

 

 

 

Select the play mode.

 

Turn the PLAY MODE switch.

3

Single track play mode

 

 

 

 

Lit

 

 

 

 

Continuous play mode

 

 

 

Select the track to be played.

 

Turn the select knob.

4-1

Flashing during search Lit when in standby

The selected track is cued and the standby mode is set.

Starting playback from the middle of track.

To start from the middle of a track, use the SEARCH buttons to move to the desired position.

Press one of the SEARCH buttons (6 or 7) in the play, pause or standby mode to set the search mode.

Press the 7 SEARCH button to move forward, the 4-26SEARCH button to move backward.

To move forward

To move backward

Start playback.

Press the PLAY/PAUSE button.

5

 

 

 

 

 

 

 

 

 

 

 

Lit (green)

 

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback begins and the playback signals are output.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Presetting the next track to be played during playback.

The track at which the standby mode is to be set or the track to be played next after the current track is played can be preset by turning the SELECT knob during playback.

In the single mode, the standby mode is set at the beginning of the next track.

6-1

In the continuous mode, the next track is played

when playback of the current track finishes.

 

 

• The Next Track display of the set track number flashes.

 

Example: When track 7 is selected while playing track 1

 

Flashing

Playback can be stopped in the following ways:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6-2

 

 

 

 

 

Flashing

Lit

 

 

Playback is interrupted, the pickup returns

 

 

 

to the play start position and the standby

 

 

 

mode is set. (BACK CUE)

 

 

 

 

 

 

 

 

 

Playback is interrupted and the

 

 

 

 

 

 

 

pause mode is set at that point.

 

 

 

 

 

 

Flashing (orange)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2) End Monitor

To check the play end position.

Press the END MON button when in the standby mode.

Lit

1The track’s end is monitored, then the pickup returns to the play start position and the standby mode is set. (End

Monitor)

NOTE: If the STANDBY/CUE button is pressed during the end monitor operation, the end monitor operation is canceled, the pickup returns to the play start position and the standby mode is set.

18

Page 18
Image 18
Denon DN-M991R operating instructions Basic Operation, English, Starting Playback, End Monitor