ENGLISH
(3) Detailed Description of Preset Functions
(* = initial setting)
1)“Preset Area (*)” (Three different sets (areas) of presettings can be made and used for different purposes.)
* | Preset Area1 | : Set to preset Area 1. | |
| Preset Area2 | : Set to preset Area 2. | |
| Preset Area3 | : | Set to preset Area 3. |
2) “Finish (*)” |
|
| |
| Finish Stop | : Stop mode is set after track playing is finished. | |
* | Finish Next | : Standby mode is set at next track after track playing is finished. | |
| Finish Recue | : Standby mode is set at playback start position after track playing is finished. | |
| Finish Repeat | : | The tracks are repeated according to the play mode. |
* When “Finish Repeat” is selected, the repeat mode cannot be turned on and off from the parallel or serial ports or from the keyboard.
3)“Stereo (Mono)”
* Stereo | : | Output L and R stereo signals from the output connector. |
Mono | : | Output mixed L and R signals from the output connector. |
4)“CueDet. OFF
* CueDet. OFF | : | Sound is not detected when cueing. |
CueDet. | : | Sound detection level setting for cueing. |
5)“D.Out Pro (Cons)”
* D.Out Pro | : | Output digital signals in AES/EBU format. |
D.Out Cons | : | Output digital signals in SPDIF format. |
NOTE: Auto Cue is not possible when the above is set to “D.Out Cons”.
6)“End Mon. (**) sec” End Mon. (**) sec End Mon. OFF
:Set the end monitor time. (5/*10/15/20/25/30/35)
:Do not use the end monitor function.
7)“E.O.M. (**) sec” (Output EOM tally signal to remote pint (24))
E.O.M. (**) sec | : | Set the EOM time. (5/*10/15/20/25/30) |
E.O.M. OFF | : | Do not use the EOM function. |
8)“Delay (***) ms”
* Delay OFF | : | Do not use the delay start function. |
Delay (***) ms | : | This sets the delay time from which the playback operation is started until playback starts. (100/200/300) |
9)“Pitch (**.*) %”
| * Pitch OFF | : Playback at normal speed. (0.0 %) | ||
|
| Pitch (**.*) % | : | Playback at variable speed. |
10) | PitchAuto OFF (ON)” |
|
| |
| * | PitchAuto OFF | : Play pitch data stored on disc not used. | |
|
| PitchAuto ON | : | Play disc at play pitch stored on disc. |
11) | “Analog (Digital) IN” |
|
| |
| * | Analog IN | : Select the Analog input signal for recording. | |
|
| Digital IN | : | Select the Digital input signal for recording. |
12) | “Rec Stereo (Mono)” |
|
| |
| * | Rec Stereo | : | Record in stereo. |
|
| Rec Mono | : | Record left channel signal in mono. |
13) | “IncDet. |
|
| |
|
| IncDet. | : | Sound detection level for auto increment function. |
14) | “AutoInc OFF (*)” |
|
| |
| * AutoInc OFF | : No auto increment of track number. | ||
|
| AutoInc Dig. | : Track number is automatically incremented during digital recording using subcodes on CDs or MDs (Q codes) or start | |
|
|
|
| IDs on DATs. |
|
| AutoInc Det. | : | Track number is automatically incremented during recording when level set in “13) “IncDet. |
|
|
|
| detected. |
15) | “Pre UTOC OFF (ON)” (Playback is possible up to that point even if power supply is cut off during recording or if recording stops due to some | |||
|
|
| problem.) | |
| * Pre UTOC OFF | : | ||
|
| Pre UTOC ON | : |
15