ENGLISH
16) | “ RecLv |
|
|
| RecLv | : Sound detection level for auto record start function. | |
17) | “RecOffset (*)” (Recording can be started before sound detection during auto record start operation.) | ||
| RecOffset (*) | : | Recording starts the set number of seconds before level detection. (*OFF/1s/2s/3s/4s/5s) |
18) | “SCMS INH (ENA)” |
|
|
| * SCMS INH | : Record onto disc same code as copy prohibit code in recording source. | |
| SCMS ENA | : | Record copy prohibit code on disc according to SCMS. |
19) | “Rec EOM (***) s” |
|
|
| * RelayRec OFF | : Relay recording mode off. | |
| Rec EOM (***) s | : | Set the Relay recording mode to on and set time at which the REC E.O.M. tally is to be output (the number of |
|
|
| seconds before the end of the recordable time). (30/60/90/120) |
20) | “Next Stb.OFF (ON)” |
|
|
| * Next Stb.OFF | : Return to the play start position and standby when the STANDBY/CUE button is pressed during playback. | |
| Next Stb.ON | : | Standby at the beginning of the next track when the STANDBY/CUE button is pressed during playback. |
21) | “PlayLock ON (OFF)” |
|
|
| PlayLock ON | : Inhibit all operations other than the PLAY/PAUSE, DISP buttons and PLAY MODE switch during playback. | |
| * PlayLock OFF | : | Enable all functions during playback. |
22) | “EjectLock ON (OFF)” |
|
|
| EjectLock ON | : The EJECT button is locked during playback. | |
| * EjectLock OFF | : | The EJECT button is not locked during playback. |
23) | “Switch ENA (INH)” |
|
|
| * Switch ENA | : Enable operation of all the switches on the front panel. | |
| Switch INH | : | Inhibit operation of all panel switches other than those used for presetting operations. |
24) | “DateDisp OFF (ON)” |
|
|
| * DateDisp OFF | : Date not displayed even when DISP button pressed. | |
| DateDisp ON | : | Date displayed when DISP button pressed. |
25) | “FR Disp ON (OFF)” |
|
|
| * FR Disp ON | : The frames are displayed on the time display during playback. | |
| FR Disp OFF | : | The frames are not displayed on the time display during playback. (They are displayed in the manual search, standby, |
|
|
| pause and end monitor modes.) |
26) | “St.Tally ON (OFF)” |
|
|
| * St.Tally ON | : The stdby/cue tally signal is output from the REMOTE connector (pins 16). | |
| St.Tally OFF | : The stdby/cue tally signal is not output from the REMOTE connector (pins 16). | |
27) | “EndCue | ||
| EndCue | : End cue time setting. | |
28) | “DryCnt (EOM/E.CUE/CUE)” | ||
| DryCnt EOM | : The end of massage tally signal is output from the REMOTE connector (pins 24). | |
| * DryCnt E.CUE | : The end cue tally signal is output from the REMOTE connector (pins 24). | |
| DryCnt CUE | : | The cue tally signal is output from the REMOTE connector (pins 24). |
29) | “T.Flash ON (OFF)” |
|
|
| * T.Flash ON | : | PLAY TALLY blinks during the EOM for parallel remote tally output, PAUSE TALLY blinks when pause, and |
|
|
| STDBY TALLY blinks during the search operation. (The same display as on the front panel is output.) |
| T.Flash OFF | : | The parallel remote tally output does not blink. |
|
|
| The tally signal is output only when the PLAY/PAUSE and STDBY/CUE buttons’ displays are lit. |
30) | “Fader Pause (Play)” |
|
|
| * Fader Pause | : Start playback when remote fader pins | |
| Fader Play | : | Start playback when remote fader pins |
31) | “9600 (19200) bps” |
|
|
| * 09600 bps | : Set the baud rate to 9600 bps. | |
| 19200 bps | : | Set the baud rate to 19200 bps. |
32) | “PlayerID (**)” |
|
|
| PlayerID (**) | : | Player ID setting. |
|
|
| (Set ID to OFF or 0 to 15. Default setting – “OFF”) |
16