16
ENGLISH
ENGLISH
14
MEMO (Custom Setting Memory)
The setting information can be stored in the non-volatile memory. The stored information can be called out of the
memory at later time, making it easy to prepare for your mixing.
1. About MEMO
Up to 5000 memo points can be stored to internal memory for later recall.
The number of tracks on a particular CD only limits the amount of memo points available per that disc.
Example: If your CD has 22 tracks, you can only save up to 22 memos. (1 memo group per track.)
CAUTION:
5000 is the maximum possible number of tracks that can be stored to memory.
However, to simplify the MEMO operations, the memory system manages each 500 MEMO data package
as a minimum unit (the total 5000 memory capacity divided into 10 package units). When you want to clear
just one MEMO data in the 1 MEMO CLEAR mode, the unit will erase the memo information but not the
internal memo allocation number. Accordingly, depending on conditions, the number of tracks that can be
stored in the memory may be fewer than 5000.
Once you reached 5000 stored points, you will see a message that says “MEMO FULL!”. At this time you
will need to “delete” old data to make room for new memo points. Therefore the oldest 500 memo points
will be deleted and become clear.
The MEMO indicator on the display lights up when a track for which data is stored in the memory is selected.
2. MEMO ITEMS
The following items are max to be stored under 1 memory bank:
qCue point
wA1 and B1 points, A2 and B2 points
ePlaying pitch, pitch on/off, Key Adjust on/off setting
rBPM data (Cue, A1 and A2 points)
3. MEMO MODE SELECT
qPush the @4 MEMO button during Cue mode to enter MEMO mode.
wTurn the @7 PARAMETERS knob to select the various MEMO modes from as follows.
Memo Set (default), Memo Call, Memo Clr
Depending on conditions, some modes cannot be selected.
ePush the @4 MEMO button again to exit MEMO mode.
(1) Storing data in the memory [Memo Set]
After making the settings to be stored in memory, then push oCUE button.
When the MEMO indicator in the display is off during Cue mode, push @4 MEMO button to enable
Memo set function.
If the MEMO indicator lights up, it is necessary to clear existing Memo before storing a new Memo.
At last push @7 PARAMETERS knob to save. You can see “Complete!” message and the MEMO
indicator lights up.
MEMO FULL
If the memory is full and no more data can be stored, “Memo Full!” and “Delete 500?” message appears.
In this case, you need to clear memory of First 500s Memo (number 1 to 500) at a time to make space
for new memos.
•To make space, push @7 PARAMETERS knob while “Delete 500?” message is displayed.
“Delete OK?” message appears then push @7 PARAMETERS knob again to execute clearing.
•After the first 500s Memo (number 1 to 500) are cleared, number after 501 Memo are renumbered as
new 1, 2, 3…(now you have new 500 empty space.).
(2) MEMO CALL [Memo Call]
When the CD includes tracks that DN-S3500 has Memo is inserted, the MEMO indicator flashes for 5 seconds.
To call out the Memo data, select the track that you made a MEMO. Then the MEMO indicator lights up.
Push the @4 MEMO button to enable Memo call function.
•When the @7 PARAMETERS knob is pushed in the Memo call mode, all the data stored in the memory
is loaded. DN-S3500 goes to standby mode at the called Cue point.
When the playing pitch is loaded from the Memo with PITCH LED flashes, playing Pitch is locked until
Pitch Slider comes same Pitch. While playing Pitch is locked, PITCH LED keeps flashing.
NOTE:
MEMO CALL of MP3 files may not be completed according to the file condition.
(3) 1 MEMO CLEAR [Memo Clr]
•To clear one Memo data, select the track that you stored a MEMO. Then the MEMO indicator lights up.
Push the @4 MEMO button to enable Memo clear function.
•When the @7PARAMETERS knob is pushed in MEMO CLEAR mode, the Memo data is cleared and the
MEMO indicator on the display turns off.
ALL MEMO CLEAR
All memory data can be cleared.
For instructions, see “⁄5 PRESET (14) MEMO ALL CLEAR”.
4. Copying all MEMO
The MEMO data can be copied between DN-S3500s or DN-S3500 and DN-D9000 or DN-S3500 and DN-
S3000 or DN-S3500 and DN-S5000.
For instructions, see “⁄5 PRESET (15) MEMO ALL COPY”.
5. Sharing the memo data
The MEMO data of two DN-S3500 or DN-S3500 and DN-S3000 or DN-S3500 and DN-S5000 can be
compared when the DN-S3500s are connected by the MEMO in/out jacks.
NOTES:
The MEMO data of the two DN-S3500 units is checked when the disc is loaded.
When other models (DN-S5000, DN-S3000 and DN-D9000) use the pitch data of DN-S3500, the pitch data
might be different according to the difference of the data format.
POWERONOFF
DIGITAL OUT
L
R
LINE OUTFADER IN OUT
MEMO
POWERONOFF
DIGITAL OUT
L
R
LINE OUTFADER IN OUT
MEMO
MEMO IN jack
DN-S3500-1 DN-S3500-2
MEMO OUT jack
3.5 mm stereo mini cord