Desa CD42M Minimum Clearances to Combustibles, Mantel Clearances, Vent Termination Clearances

In selecting a location, the following precautions must be observed:

Do not connect this appliance to a chimney system used for solid fuel burning fireplace.

Due to high temperatures, do not locate this appliance in high traffic areas or near furniture and draperies. Never obstruct the front opening of the appliance or the flow of combustion and ventilation air. Keep control compartments accessible.

Do not locate close to where gasoline or other flammable liquids may be stored. The appliance area must be kept clear and free from these combustible materials.

Do not use this appliance if any part has been under water. Immediately contact a local service technician to examine the fireplace and to replace any part of the control ignition system and other related components that has been submerged under water.

MINIMUM CLEARANCES TO COMBUSTIBLES

• Back and side of fireplace -------------------		0”
•	Floor ------------------------------------------	0”
•	Perpendicular wall ---------------------------	6”
•	Front -------------------------------------------	36”
•	Top of Standoffs -----------------------------	0”

MANTEL CLEARANCES

Woodwork, such as wood trims, mantels and other combustible materials should be placed within the required clearance specified on figure 2.

Ref.	Mantel Depth	Ref.	Mantel from top
			of opening
1	14"	A	16"
2	12"	B	14"
3	10"	C	12"
4	8"	D	10"
5	6"	E	8"
6	4"	F	6"
7	2"	G	4"

Figure 2 MANTEL CLEARANCES

WARNING: Do not block required air space with insulation or any other material. Do not obstruct effective opening of appliance with any type of facing material.

VENT TERMINATION CLEARANCES

The final position of your fireplace depends on the location of the vent termination in relation to the clearances that must be observed as shown in figures 3 and 4.

Figure 3 VENT CLEARANCES

Figure 4 VENT CLEARANCES

-3 - For more information, visit www.desatech.com