OWNER’S MANUAL
PRODUCT |
|
IDENTIFICATION | Log Set |
|
Manual
Override
Handle
Piezo
RemoteIgnitor
Control
Wall Switch/Plate
Manual Ignition
Bypass Switch
Figure 1 - Fireplace Floor Assembly (EFP33NR Shown)
Top Outer
Casing
Top Louver
Assembly
Firebox
Hood
Firebox
Support
Screen
Assembly
Figure 2 - Fireplace | Bottom Louver | Blower Assembly |
Assembly | (Optional) |
LOCAL CODES
Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code, ANS Z223.1, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
UNPACKING
1.With utility knife, cut the carton all the way around above the staples on the bottom tray. Lift the carton off the heater. Remove packing. Note: The hood is located in the packing on the right hand side of the fireplace. Lift the fireplace off the bottom tray.
2.Locate two screws above top corners of the fireplace screen. Remove and discard these screws. Lift fireplace screen up and pull out to remove.
3.Remove protective packaging applied to logs, fireplace floor assembly, and fireplace.
4.Check all items for any shipping dam- age. If damaged, promptly inform dealer where you bought fireplace.
107569 | 3 | For more information, visit www.desatech.com |
