Desa CGEFP33NR Accessories, Corner Mantel, BRASS TRIM ACCESSORY GA7090 Not Shown

UNVENTED NATURAL GAS FIREPLACE

ACCESSORIES

Purchase these fireplace accessories from your local dealer or Parts Dealers list on page 29. If they can not supply these acces- sories, call DESA International’s Sales De- partment at 1-800-458-2472 for referral in- formation. You can also write to the address listed on the back page of this manual.

CORNER MANTEL

ACCESSORY WITH FIREPLACE PERIMETER BRASS TRIM (Not Shown)

GMC36F Series - Walnut Finished Birch Veneer

GMC37U Series - Unfinished Birch Veneer, Ready to Stain or Paint.

CABINET MANTEL AND BASE ACCESSORY WITH FIREPLACE PERIMETER TRIM

(Not Available at All Locations)

GMC8CU Series - Unfinished Birch Veneer, Ready to Stain or Paint

GMC9CF Series - Walnut Stained Birch Veneer

GMC10CF Series - Stained Oak Veneer

Mantel and base feature moldings, fluted sides, and medallion.

Mantel Dimensions (H xW xD): 44 3/4" x 53" x 20 3/4"

Base Dimensions (H xW xD): 3 3/4" x 48 1/4" x 23 3/4"

BRASS TRIM ACCESSORY GA7090 (Not Shown)

Optional with built-in installation. Provides a finished appearance covering rough and/or unfinished mantel or wall opening, edges, etc.

CABINET MANTEL ACCESSORY WITH FIREPLACE PERIMETER BRASS TRIM

GMC11F Series - Walnut Finished Hardwood Veneer

GMC12U Series - Unfinished Hardwood Veneer, Ready to Stain or Paint.

GMC13F Series - Medium Stained Oak Veneer

Mantel features moldings, fluted sides, and medallion.

Dimensions (H xW xD): 44" x 57 3/4" x 22 7/8"

HEARTH BASE (for Use with Cabinet Mantel)

GC3333F Series - Walnut Finished Hardwood Veneer

GC3334U Series - Unfinished Hardwood Veneer

GC3335F Series - Medium Stained Oak Veneer

The hearth base creates a handsome riser for the fireplace .

Dimensions (H xW xD): 6 1/2" x 58" x 28 9/16"

DUPLEX OUTLET KIT - GA3555 (Not Shown)

Use for built-in installations when hard wir- ing your fireplace.

Space saving corner mantels feature mold- ings, fluting and medallion.

Dimensions (H xW xD): 48 3/4" x 60 7/8" x 34 3/4"

EQUIPMENT SHUTOFF VALVE - GA5010

For all models. Equipment shutoff valve with 1/8" NPT tap. Fits 1/2" NPT pipe.

BLOWER ACCESSORY GA3750 SERIES AND GA3650T SERIES

Manual variable control and automatic ther- mostat variable control. A blower will in- crease air flow to maximize heat distribution.

CLEANING KIT - CCK (Not Shown)

Your vent-free gas appliance requires regu- lar cleaning and maintenance to prevent performance problems. This kit gives you the tools and instructions to make it easy to clean all critical areas of your appliance.

For more information, visit www.desatech.com 34 107569