INSTALLING HEATER
Continued
INSTALLING RADIANTS
WARNING
WARNING ICON | G 001 |
Carefully handle the glass panel. Glass edges are rounded and buffed to prevent cuts, however, chipped or broken sections of glass can present sharp edges. These sharp edges can cut skin.
1.Remove glass guard from across opening at front of heater (see Figure 8).
2.Place radiants into combustion chamber through opening at front of heater. Front of radiant sits on front radiant support (see Figure 9, page 14). Back of radiant rests on back radiant support (see Figures 8 and 9).
Note: Radiants should never come in contact with burner flame. Contact with flame may cause carbon or soot deposits on radiants.
Burner
Glass
Guard
Combustion
Chamber
Back Radiant
Support
Lower 
Front Access
Panel
Lower Front Access Area
14
Glass Retaining Channel
Figure 9 - Location of Radiants
Back Radiant Support
Radiant
Front Radiant
Support
Burner
Figure 10 - Position of Radiant
100792
