TROUBLE-
SHOOTING
Continued
30
OBSERVED | POSSIBLE |
|
| |
PROBLEM | CAUSE | REMEDY | ||
|
|
|
|
|
Burner fails to | 1. | Pilot flame not lit. | 1. | Light pilot burner (see |
respond to thermo- |
|
|
| Lighting Instructions, |
stat. |
|
|
| page 32). |
| 2. | Pilot flame not prop- | 2. | Pilot flame needs |
|
| erly heating end of |
| adjusting. Contact a |
|
| thermocouple. |
| qualified service person. |
| 3. | Pilot burner orifice | 3. | Clean pilot burner (see |
|
| clogged or damaged. |
| Cleaning and Mainte- |
|
|
|
| nance, page 26). |
| 4. | Control valve defec- | 4. | Replace control valve. |
|
| tive. |
|
|
| 5. | Temperature at ther- |
|
|
|
| mostat bulb satisfied. |
|
|
|
|
|
|
|
Heater produces a | 1. | Air in gas line. | 1. | Operate burner until air |
whistling noise when |
|
|
| is removed from line. |
burner is lit. |
|
|
| Have gas line checked |
|
|
|
| by local natural gas |
|
|
|
| company. |
| 2. | Air passageways on | 2. | Observe minimum |
|
| heater blocked. |
| installation clearances |
|
|
|
| (see Figure 3, page 7). |
| 3. | Dirty or partially | 3. | Clean burner (see |
|
| clogged burner orifice. |
| Cleaning and Mainte- |
|
|
|
| nance, page 26) or |
|
|
|
| replace burner orifice. |
|
|
|
| |
Heater produces a | 1. Metal expanding while | 1. | This is common with | |
clicking/ticking noise |
| heating or contracting |
| most heaters. If noise is |
just after burner is lit |
| while cooling. |
| excessive, contact |
or shut off. |
|
|
| qualified service person. |
100792
